since i doesnt take any feedback and the bread pops out as soon as the time is over. whether the bread was toasted or not is not seen, hence it is open loop.
A Closed loop system basically will have a feedback which enables the rectification of the error in the main process,whereas it is not possible in an open loop system
closed loop system
A: DEFINITELY NOT Open loop is defined as no feedback. any kind of negative feedback will reduce the gain
An open loop traffic signal just cycles on a schedule and has no "knowledge" of traffic patterns or current traffic. A closed loop system would have sensors letting it know when traffic was present and a controller that would make decisions based on the traffic conditions.
A typical sump pump just sits there and does nothing until a sensor detects that sufficient water is present to turn on. If it just pumped forever it would be open loop. The fact that it also senses when the water has been pumped and stops makes it a closed loop system. If you're referring to the water in the system, it is an open loop system, since the water is not held in the system.
A sprinkler system, gas ring, timed cotrol, automatic toaster, washing machine, or a oven.
The system without feedback is known as open loop system. The examples of the open loop system are bread toaster, oven ,washing machine. The open loop systems are inaccurate & less complex.
The sensitivity of an open loop control system is always 1, it is due to no feedback involved in open loop.
The open loop system is simple and economicaleasier to constructstable
Very generally, a closed-loop system will have some form of feedback that regulates the system behavior, whereas an open-loop system does not have this feedback. As a simple example, imagine you driving a car on a freeway: your car enters at 50 MPH and you want to be driving at 65 MPH. You know that if you depress the pedal at a certain degree for a certain amount of time, you will eventually accelerate the car to 65 MPH. In an open-loop system, you would have to make the best guess for the angle and amount of time you need to depress the pedal. In a closed-loop system, you are watching your odometer in order to see that you've actually increased your speed to 67 MPH and need to lay off the gas a bit. More importantly, if your car encounters a hill your closed-loop system will be able to recognize the fact that you require more acceleration to maintain your speed, whereas your open-loop system might slow down a lot. It should be clear from this example that closed-loop systems are in general more robust to changes in the system state that aren't considered in your model.
A Closed loop system basically will have a feedback which enables the rectification of the error in the main process,whereas it is not possible in an open loop system
closed loop system
no.
loop checking is perform before cable termination..the difference between a close loop and open loop is,tha close loop has a feedback while the open loop has not.
yes
A: By definition there is no control on a system in an open loop situation. simply . it has no feedback
no they have double loop circulatory system but the difference is that they have single ventricle.