0
Why is it hard to select 1st and 2nd gear in your vauxhall vectra?
Wiki User
∙ 14y ago
Either gear box is knackerd, or its got the wrong oil in it, if the oil i too thick, it will feel like treacle to change certain gears.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
How do you remove a gear knob on a Vauxhall agila?
A vauxhall agila gear knob is hard to remove but to remove it you only need to pull it as hard as you can while twisting it then wank it will come off.
How do you make the brake pedal hard after changing your rear brake pads on your vauxhall vectra?
reverse then hit the brakes hard do this a few time and the self adjusters should adjust for you
Transit connect hard to select first gear at times?
That's good thanks for telling me.
How do you take of a gear knob of a vauxhall vectra 06?
It's a press-fit onto the lever. Generally it takes so much force to pull/twist it off the lever that the mechanism lower down holding the lever in place will break before you pull/twist hard enough to remove the knob. To remove it to replace it with a different knob, use a hack-saw, and cut it in half, taking care not to cut the lever or other items.
How hard is it to replace front and rear anti-roll bar bushes and drop links on a 1998R reg 1.6 16v vauxhall vectra?
The rear are easy enough and the front drop links but for the front anti roll bar bushes you need to drop the front subframe, quite a big job.
Why is that my 1986 corvette when you are in gear and moving the gas peddle is hard to push when not in gear at idle not hard to push at all.?
== ==
On Metal Gear Solid 2 how many rays do you fight on hard?
When playing Metal Gear Solid 2 on Hard you must defeat 12 Metal Gear Rays.
How do you enter the radio code for a ZC 2004 Vectra?
its in the owners manuel it is not very hard.
How do you take front bumper off vauxhall tigra?
remove the screws and pull it hard
When gear shift won't move?
truck start shift is hard to move in gear
Why is the gear shifter hard to shift into each gear on a 2000 intrepid?
The shift cable has failed.
Gears difficult to change on 1997 corsa especially reverse?
The gear linkage on top of the gear box on this shape of Corsa suffers from wear very commonly. It seems that the ball & socket joints get water in them, causing the metal ball to rust, and then wear away the plastic socket. The mechanism has been re-designed with the aim of preventing water getting in the joints. There are two repair kits available from GM, a small kit for use when 1st and 2nd are hard to select, and a larger kit that is needed if reverse is hard/impossible to select.
