Why is my Peugeot 106 bake lights not working?

What's the question? Yes, a peugeot 106 has dashboard lights.

If the bulbs are working then you just need to change te fuse.

you haft to remove the bumper first to get to the bolts holding in the lights

put a new bulb in it then lol

im sorry to say but the peugeot 106 pump always goes on the car it can be easily be fixed! go to a scrap yard and you can get the pump for £90 goodluck

have you tried replacing the bulb If its an auto,when replacing the switch on the g/box you have to rotate switch to a certain position.This may be only a few millimetres left or right.Try that

No the Peugeot 106 is not considered vintage. This is true because the Peugeot 106 was made in the year 1991. To be a vintage car you have to be around for more the 20 years

Yes, as long as your wheels are 4 stud. Some peugeot 106 models are 3 stud.

the brake light fuse on a peugeot partner is F1O!! STOP SWITCH FUSE!!

Peugeot 106 cars are no longer manufactured. If you want to buy one, you must buy it second hand. However, the Peugeot 106 was originally manufactured in France. They were also manufactured in Tunisia.

it is located in the glove box and is linked to other circuits if your headlight buzzer ( the 1 that buzzes when you leave your lights on after removing the keys) is still working then it is ok and you need a new motor it is located in the glove box and is linked to other circuits if your headlight buzzer ( the 1 that buzzes when you leave your lights on after removing…

Check brake fluid level Check to see if stop lights are working UPDATE: The official Peugeot 106 manual states this is 'Brake Pad Wear'. I would say they need replacing. Not massively expensive if you take it to a garage, though a friend with moderate car maintenance experience could be able to do this.

Peugeot 106 workshop manual.

Probably because those are warning lights and your car is neither low on oil nor overheating. Alternately check bulbs and fuses.

i have a peugeot 106 zest 3 1.5 s reg probulem with rear door not closing propely

The 106 GTI Peugeot vehicle was in production from 1996-1999 as a French vehicle. The original Peugeot vehicle was first introduced in the fall of 1991.

i have seen pug on a saxo so i think if u mod the lights on the mk2 saxo bonnet it will fit :)

changing speedo cable pergeot 106

The Peugeot 106 was introduced on September 12, 1991 and was produced through the year 2004. It was produced in France and considered a 'supermini' in class.

The Peugeot 106 "Quicksilver" model was first introduced in 1991. There were several 106 models on offer at the time but in 1998, the range was reduced but the Quicksilver model remained in production.

How do you change a shock on a Peugeot 106 gti

The Peugeot 106 is actually a French produced care made in 1991 but automaker, Peugeot. It is still being manufactured today in many parts of Europe is considered a very common car.

A Peugeot 106 car is a car that is made in France. Peugeot was the name of the man who made this car. It is a small car. It is even smaller than a small family car. It was made from 1991 to 1994.

To adjust your headlights on a Peugeot 106, you need to find the screws to covers the headlights. Look on the chrome that covers the headlights, and if not there, check under the rim.

The ignition module for a peugeot 106 is in the engine compartment. Facing the car with the hood open, the ECU is behind the headlamp nearest your left hand.

depends.... ABS AIRBAG OIL LEVEL OIL TEMP WATER LEVEL WATER TEMP WATER IN DIESEL ECU FAULT depends on car model

One can purchase Peugeot 106 alloy wheels at their local Peugeot dealership. These wheels can also be found at auto parts retailers such as Auto Zone and NAPA Auto Parts.

its set by the ecu

The fog light switch on my peugeot 106 is next too the hazard warning switch and the rear window heater switch below the stereo.

Yes, though they arent imediately obvious as they are hidden by a red tint. Turn on ignition so the dash lights up, but dont start the engine, put the gearstick in reverse and walk round back of the car. voila.

106 immobiliser can be reset by turning on the ignition, and leaving it on for about 30 minutes

Im no certain but in my 106 it is behind the glove box

On the peugeot 106 there is an oil cap on the top of the engine, note don't forget to check the level after you have put some in otherwise you could over fill it. HKP

how do you bleed a diesel peugeot cooling system

You should be able to but you will need new mounts and some links.

All the fuses are located to the side of the steering wheel. Remove flip down panel and search for the fuse using the fuse diagram located on the back of the flip down panel.

Go to a garage

with a bar of soap

4 / 5 liters

on the gear box

Owners hand book.

The best place to purchase a Peugeot 106 exhaust system is from your local mechanic. If that is not an option, eBay Motors is always a great option for car parts.

1. Unlock the vehicle using the working key. 2. Press the LOCK button 2 times within 20 seconds.

I purchased a new Peugeot 106, Independence in March 2002 and it did not have power steering. I believe that power steering was introduced later in the year, so there are probably a mixture of 106 cars from 2002 with and without power steering.

timing belt changes are every 70k on 106 d

yes if you shange all suspension parts including brakes

press the button! press the button!

5 inch (13 cm)

under the ecu.

break the window