You must program a favorite wash cycle to use hot wash. They describe it in manual as "cleaning the inside of your ecosmart".
Fisher and Paykel's most popular products include water filters, dishwashers, microwaves, refrigerators, and other standard appliances. They are especially known for appliances that include microprocessors and brushless motors. Brushless motors can be more efficient and durable than ordinary brushed motors.
Plagued with faults. In the way of washers: In the early fisher and paykel machines, the main control board was water cooled, and often had an issue of the watercooled heatsink corroding through, and spilling water onto the pcb, blowing up the machine. The phase after that, they had a horrible issue of wires shorting to the chassis of the machine - blowing up the machine. The phase after that, Opening the lid in spin(occasionally), the pump failing, water valves failing, all would blow up the controller in the machine. The phase after that, introducing the lid lock, worked well, except still had a fault where the control board would give random faults. The newest phases of fisher and paykel, are all HAIER machines, rebadged (as Haier now owns 49% of fisher and pakel). Haier being a cheap Chinese brand... Only new so not many failing yet, but more then likely, wont be long. Hope this helps.
You can't get rid of extra water in the washer.
Many owners suggest purchasing a Fisher Paykel washing machine, quoting its durability and affordability. It is also energy efficient and made in New Zealand, so it will save money on water usage.
Fisher's appearance is a gel like lens. The lens are water plastic.
Under where the washer bottle extends over, i believe there is a cover there to stop water getting in.
The drain from the washer to the main line is getting plugged and the floor drain is easier. Drain cleaner in the floor drain should take care of it.
Cyrus Fisher Tolman has written: 'Ground water'
Water.
You need to take the hoses off washer and check for trash in your machine valve. Make sure you turn off water to the machine
It fills the washer with water from the source, Theres usually a cut-of valve or faucet on the wall near the washer for it.
Check wires to pump see if your getting 120v