0
The relief vent in the radiator cap is not working, replace the radiator cap.
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
Do you have to take out the engine to fix a radiator hose in Chrysler lebaron?
No, you do not have to remove the engine to replace a radiator hose.No, you do not have to remove the engine to replace a radiator hose.
Why wont your car start after your upper radiator hose burst I fixed hose still wont start?
You may have overheated the engine or seized it.
How do you you change antifreeze on a Pontiac Grand Am 92?
1. Open the radiator cap. 2. Disconnect the top radiator hose. 3. Run the engine for a couple of minutes with the hose off. 4. Insert tap water hose into the radiator where the top hose should be. 5. Run water into the radiator until clear water comes out of the radiator top hose. 6. Continue idling the engine, remove the tap water hose from the radiator, shut off engine as soon as the water stops coming out of the top water hose of the radiator. 7. Reconnect top water hose and fill radiator with antifreeze. Start engine and top off antifreeze.
Which radiator hose goes to the engine?
In most cases the lower radiator hose feeds the water pump. The upper radiator hose feeds the radiator.
Where is the thermostat on your dodge 5.9?
Under where the upper radiator hose hooks to the engine.Under where the upper radiator hose hooks to the engine.
Where is the thermostat on a Jeep 4.0 engine?
It is under the housing on the engine that the upper radiator hose hooks to.It is under the housing on the engine that the upper radiator hose hooks to.
How do you flush the radiator of 1999 Chevy S-10?
An easy way to flush a radiator is to remove the bottom hose from the radiator, and put a garden hose in the top fill hole, turn the water on, on the garden hose and let the water push the water out of the radiator. Do not start the truck. This is for flushing a radiator, not an engine. Dont forget to reattatch the bottom hose and refill the radiator as water will also flow out of the engine and will now be low.
How do you change the thermostat on a 1993 Pontiac Transport?
follow the top radiator hose to the engine. that is where your thermostat is. you will have to drain the radiator, remove the engine side of the hose and remove the thermostat housing to access it. remove thermostat clean mating surface of housing and engine, install thermostat, install housing, secure radiator hose, fill with coolant. start engine and check for leaks.
Where is the thermostat on a 2007 dodge charger?
2.7l and 3.5L, it is under the housing where the lower radiator hose hooks to the engine.5.7L and 6.1L, it is under the housing where the upper radiator hose hooks to the engine.2.7l and 3.5L, it is under the housing where the lower radiator hose hooks to the engine.5.7L and 6.1L, it is under the housing where the upper radiator hose hooks to the engine.
Where is the thermostat on a Chrysler Concorde?
1993-1997 it is under the housing where the upper radiator hose attaches to the engine.1998-2004 it is under the housing where the lower radiator hose attaches to the engine.1993-1997 it is under the housing where the upper radiator hose attaches to the engine.1998-2004 it is under the housing where the lower radiator hose attaches to the engine.
Where is the thermostat located on a Chrysler Concorde 3.5 liter engine?
1993-1997, it is under the housing where the upper radiator hose hooks to the engine.1998-2004, it is under the housing where the lower radiator hose hooks to the engine.1993-1997, it is under the housing where the upper radiator hose hooks to the engine.1998-2004, it is under the housing where the lower radiator hose hooks to the engine.
How do you replace the top radiator hose on a Dodge Charger?
drain the radiator down below the top hose and unhook the hose from the radiator and the engine and pull the hose off.
