Could be,Battery failure,
Loose or corroded battery connections,
Starter relay failure,
Starter failure,
Starter solenoid failure,
Neutral safety switch broken or out of adjustment,
the starter relay.
It is attached to the starter.
The starter solenoid is attached to the starter.
An S2 starter is used when wiring 2 fluorescent tubes in series while S10 is used on a single tube
To change the starter on a 1998 s10, the motor mount will have to be removed. Support the motor on a jack with a board on the top of it, and remove the mount to get to the starter.
You have a starter/ignition switch mounted in the steering column and you have a starter solenoid switch that is mounted to the starter.
Follow the positive battery cable from the battery, it will lead you right to the starter.
The starter solenoid is attached to the starter.
YES.
Follow the positive battery cable from the battery, it will lead you right to the starter.
Follow the positive battery cable from the battery, it will lead you to the starter.
how to remove the starter from a 92 s-10 4x2 with a 2.8 engine