Well what do you know I solved the mystery mmyself it turns out after I paid to replace wheel cylinders and hoses and bleeding the brakes the cure was an $8.00 brake switch. Once I changed the switch the flashing brake light monster went away. So to anyone else who has a flashing brake light problem with your 89 Chevy S10 Blazer if you get a code 10 that is when the brake warning light flashes 10 times the fix is a new brake switch hope this helps someone.
Directly above the brake pedal.
b/c light fool
you can find the switch on the back of the brake pedal.
you most likely need to change them
If nothing is holding the pedal down then the brake light switch is at fault.
The brake light is on because there is a problem with the brake system. Until the problem is fixed the light will remain on. Once the problem is corrected the light will reset itself.
It could be low on brake fluid, a sign of trouble. Have the brakes checked SOON!
brake light flashing on 2002 jetta tdi
This light is trying to tell you that your brake fluid may be low. Check your brake fluid and fill if it needs it.
Check the brake light switch.
You have a severe misfire. See related questions below.
Check the fuse, check the bulbs and check the brake light switch, it should be one of those.
Remove the wiring harness from the high mount brake light. Remove the retaining screws. Reverse the process to install the new high mount brake light.
The 2001 Chevy Blazer brake lights may not work and the third bake stays on because the current light needs to be replaced. A replacement brake light can be purchased at an Auto Parts store like Pep Boys.
The antilock brake system has a problem. The light will remain until it is fixed. The abs will not function when light is on. Take it to your mechanic soon.
The center high mount led brake light unit has been known to go bad.
Check the light for condensation. There could be a short that has cause the light to malfunction. If so, the entire light unit will have to be replaced.
How do you reset check engine light for the 2009 Chevy trail blazer?
could be that the emergency brake cable is stretched and the pedal has fallen down a bit.try lifting up on your emerg brake pedal
how do you replace dome light in s10 chey blazer?
If the brake light fuse is good and the brake light bulbs are good it's probably a faulty brake light switch.
how to change third or center brake light on Chevy beretta 95
You will need to remove the 1998 Chevy Camaro brake light wiring harness. Remove the brake light retaining screws. Reverse the process to install the new brake light.
Brake Lights Stay on Unless the Brake Pedal is RaisedThis is usually caused by the brake light switch being out of adjustment in its physical distance to the contact point on the brake pedal arm.
It is quite easy to install the 1992 Chevy Lumina brake light switch. The brake light switch simply plugs in and out.