Why is your 1986 ford ranger running really rich replaced o2 sensor?

The speed sensor is located on the differential (rear end) I have a 99 Ford Ranger and have recently replaced one. EASY! Good luck! ...

its on the rear of the transmission, it cant be replaced by itself, its part of the trans ...

Where is the ford ranger 2004 revcounter sensor conected

no no no my crank sensor when out on my truck ar 95k now i have 125k and she is still running good ...

The throttle position sensor determines the amount of throttle used when the engine is running at various speeds. If the sensor is faulty, it can be replaced by ordering a new part. ...

take it to a mechanic. they'll know. I AM LINK....!

it might be because the idle is low turn your idle up and it should stay running ...

Where is the crank sensor located on a 94 ranger 4.0 motor

mine did that and i replaced the crank shaft sensor,problem was fixed

Just had this problem. I replaced the oxygen sensor and it appears to be running fine. ...

1995 ford ranger 4wd cranks over but no spark, replaced crank sensor Check battery power to coil connector, if that is good coil can be tested w/multimeter. ...

YES - www.motorcraft.com lists a DPFE sensor for all available engines on a 1996 Ford Ranger ...

Where is the temperature sensor on a 2002 2.3l DOHC ford ranger motor? I really need to know so I can replace it. I don't want to get raped by the dealer just to find out where it's at. please help ...

may not have been problem. remember you have a camshaft sensor, crankshaft sensor but most importantly the timing belt alignment .if it is worn or jumped a tooth will give same problem.Let me know what you have done to determine it is the cam shaft that needed to be replaced ? ...

probably misaligned your crank sensor.. I'm dealing with the same problem, might need to replace with new and make sure to gap properly. ...

What is a carbon dioxide sensor?

I just replaced the ABS speed sensor located on the rear differential and fixed the problem. 10$ 10 minutes. ...

I'm not a mechanic / technician but on a 1988 Ford Ranger there might be ( 1 ) oxygen sensor ( upstream sensor ) ...

The 1998 Ford Ranger speed sensor ring can be located on the passenger wheel. The speed sensor ring will be on the inside of the brake rotor. ...

The fuel sensor in the gas tank is bad and needs replaced.

The mixture is electronically controlled by the computer via a throttle position sensor (TPS) tha is mounted somewhere near the carburetor throat. The sensor may be faulty and needs to be replaced. ...

bad crank shaft position sensor

The 2002 Ford Ranger camshaft position sensor is located on the back of the camshaft. The rear engine plate will need to be removed in order to view the sensor. ...

The 1999 Ford Ranger 3.0 liter engine throttle positioning sensor is located on the cylinder head. The sensor will be near the middle of the cylinder head. ...

The temperature sensor for your cooling fan may need to be changed. The temperature sensor wiring may need to be cleaned or replaced. ...