Your 1983 Chevy S10 Blazer might stall when the accelerator pedal is depressed because of a clogged or dirty fuel filter. Gas that is mixed with water or condensation from the tank can also cause this issue.
bad clutch bearing
Haynes makes a manual with the wiring schematic for the O2 sensor on a 1991 Chevy Blazer S10. The manual can be found at most book stores.
Need to know what year it is, it makes a difference.
It is the accelerator pedal.
Could be a plugged fuel filter or a bad fuel pump.
the blazer was stoped being produced in 2005
Yes. it is the same as S10. Alston Cassis Works, makes a kit, with everything you need, from mounts, to headers.
There are three models of the Chevy Trailblazer. The standard model, the EXT which has a 3rd row seat and makes it a 7 passenger and the SS which is super sport.
There are no new 1990 cars since this is 2017 and that makes a 1990 car very old.
When you press the accelerator, the engine wants to tach up right then and there... in the current gear the car is traveling in, it may not be possible without bogging the engine down, so the transmission is shifted down in order to accommodate the demand for increased RPMs while preventing the engine from bogging.
The buzzer that lets you know the key is in the ignition in a 1989 Chevy Blazer is in the steering column. To access it you would need to remove the steering wheel with a special tool, or remove the ignition assembly. The key makes contact with a tab that activates the buzzer.
wash you blazer. it will make it shrink