Because the temperature change that occurs across the heat exchanger from the entrance to the exit is not linear, and a logarithmic function best describes this temperature change.
for temperature sensing i will suggest a RTD or A THermocouple. for temperature sensing i will suggest a RTD or A THermocouple.
You use a thermocouple as the input to the amplifier circuit.
Semiconductor resistance depends on temperature. So, you can use a shunt resistor to measure semiconductor voltage with a given current and, then, obtain temperature.
Thermometer
When I heard this I just assumed people were saying cement to mean they were using concrete. In my experience most people do not know the difference.
The use of the LMTD arises straightforwardly from the analysis of a heat exchanger with constant flow rate and fluid thermal properties. It is a simple method to approximated the temperature diving force in a heat exchanger. The LMTD is a logarithmic average of the temperature difference between the hot and cold streams at each end of the exchanger. The larger the LMTD, the more heat is transferred.
'Lmtd' might be okay in a text message. Otherwise, it's lazy - use 'limited.'
measuring temperature difference
The water from an air conditioner you are referring to is known as condensation. This occurs when there is a difference in temperature between an object and the temperature of the air.
No. Temperature is a measurement of atomic or molecular movement. If you have a difference in temperature between two things, you could use the difference, (and reducing the difference) to get energy, To put it simply, if you have a hot item and a cold item, you can take the difference to make electricity. If you are in a desert, and everuthing has the same temperature, you can't. Similarly, the weights on a clock gives energy to the movement of the clock, until they reach the floor, then all the potential energy has been transformed into kinetic (movement) energy in the clock, and finally to heat due to friction.
A pair of bulbs for measuring temperature and one is wet ted to give the temperature difference when it is spun in the air to cool the bulbs, or you can use a pressure vessel type with a mirror
Difference in math means subtraction. To express the difference between 6 and 2 you would use the equation 6 - 2 = 4.
There isn't a difference in the statements continue using and continue to use. Both mean to keep going and not stop using a specific item.
You would use subtract to find the difference between values, by subtracting the lower value from the higher one.
Normally the term " delta T" is used to indicate the difference of two temperature readings.
If by English you mean American then yes, in London I believe they use Celsius.
There are no units for measuring the use of temperature.