Quantcast
answersLogoWhite
notificationBell

Top Answer
User Avatar
Wiki User
Answered 2011-09-13 17:11:00

Well a friend and i had this same problem on a 1992 Jeep Grand Cherokee, and the problem was that when she was unlocking her door on the drivers side, it wouldn't turn the alarm off because the theft deteraint system sensor in the key switch had gone bad, so every time she opened the door the alarm went off. So the solution to her problem and posibly yours was to go to the other side and unlock it on that side and it worked for her and hopefully you. Best of luck to you.

Answeri had same prob with my vectra easy cure sit in the car put kes in ignition and tiurn to position 1 then press the buttons on the remote key fob a few times this resets the sensor then everything works fine again

ANSWER

WWW.VVOC.COM

any questions you have about the vectra will be answered on that site mate

001
๐Ÿ™๐Ÿฟ
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0
User Avatar

Your Answer

Still Have Questions?

Related Questions

How do I unlock the petrol cap in the Vauxhall Vectra?

on my 53 vectra you have to unlock all the cr doors ie press remote twice. petrol cap will then open


What does the alarm button do on the dashboard of your vectra sri?

It allows you to sit in the car with doors locked and stops the alarm going off while still in the vehicle


How do you disable the alarm on a 1997 Chrysler town and country?

The factory alarm can not be disabled. It is part of the engine and body computers. The alarm is reset by unlocking the doors with a key or remote.


How do you reset the alarm on a 1998 Chrysler Sebring?

The alarm is reset by unlocking the doors with a key or the remote.The alarm is reset by unlocking the doors with a key or the remote.


Is there a car alarm in a 04 ford ranger 4x4?

Its not really an alarm it just has to be started and have the doors opened by the same coded key or the engine will not start.


How do you disarm the alarm on a Chrysler sebring?

The factory alarm is reset by unlocking the doors with a key or the remote.The factory alarm is reset by unlocking the doors with a key or the remote.


How do you turn the alarm off on a 2000 Chrysler Sebring JXI without the remote key?

You can disarm the alarm by unlocking the doors with a key.You can disarm the alarm by unlocking the doors with a key.


How do you unhook Alarm system on 2000 town and country?

The factory alarm can not be disabled. It is part of the body and engine computers. It is reset by unlocking the doors with a key or remote.


How do you disable the factory alarm on a 1997 Chrysler Town and Country?

The factory alarm is part of the engine and body computers. It can not be disabled. It is reset by unlocking the doors with a key or remote.


How do you disable stock alarm on 97 intrepid?

The factory alarm on a Dodge Intrepid can not be disabled. It is part of the engine and body computers. It is reset by unlocking the doors with a key or remote.


How do you disable a 1999 Chrysler Sebring jxi alarm?

The factory alarm is reset by unlocking the doors with a key or use the remote.The factory alarm is reset by unlocking the doors with a key or use the remote.


Your alarm keeps going off on your Saab 93?

which alarm? if it the security alarm then its because all the doors are not unlocked when they are being opended and if you pop your trunk but the doors are not unlocked it will do the same.


How do you reset the alarm on a 2005 Lincoln ls?

If it is a factory alarm then shut all the doors, and use the key to lock and unlock all the doors.


How do you disable 2000 grand Cherokee anti theft system?

The factory alarm can not be disabled. The alarm is a function of the engine, body, and key computers. The alarm is reset by unlocking the doors with a key or remote. If malfunctioning a scan tool is required to diagnose.


How to reset your vauxhall remote key fob?

For Omegas, put the key in the ignition and press one of the buttons within 30 seconds- the doors will lock and unlock. For Omegas, put the key in the ignition and press one of the buttons within 30 seconds- the doors will lock and unlock. This also works for older Vectra models


How do you disable the factory alarm on a 2001 Sonoma?

If you lock the doors from the inside by using the lock button, the alarm will not sound. If you lock the doors from the outside by using either the key or the remote control, the alarm is set to active.


How do you disarm the alarm on a 1996 Chrysler Sebring?

You disarm the alarm by unlocking the doors with the key or the remote.


How do you reset 1994 Nissan 300zx alarm?

unlock the doors manually and it should reset your alarm.


How do you tern off the alarm on a vauxhal vectra if the key fob is not doing its job?

its the locking of the driver and passenger door with the key that operates he alarm. the only way round it is to lock the drivers and passengers doors from reaching in via the back doors or obviously locking the passenger sides before getting out by pushing th pin down then get out of the car and lock the drivers door by reaching in from the rear drivers door.


How do you disarm the alarm on a 2000 Chrysler Sebring convertible?

The alarm is disarmed by unlocking the doors with the key or remote.


How do you reset the alarm on a 2004 Dodge Caravan?

The factory alarm is reset by unlocking the doors with a key or remote.


How do you reset a 93 Grand Wagoneer Alarm System to Enable Engine Start?

try locking the doors and using the key unlock the passenger side door


How do you turn off the alarm on a 1997 Jetta and can you deactivate the alarm system?

Read your owner's manual. This information can be found there.AnswerYou turn off the alarm on a 1997 Jetta by unlocking any of the 2 front doors. The alarm is temporary disabled when opening the trunk. If you set off the alarm because you replace the battery then you have to lock and unlock the doors to turn it off. First, lock all doors, including the trunk. Then reconnect the battery cables. Finally, unlock the doors. Instead of unlocking one of the front doors, you can also disable the alarm. This can be done by, after locking your car - which automatically arms the alarm, wait a few seconds and then turn the key the other direction for about half a second. This disables the alarm, yet leaves the door locked.


How do you disarm a factory alarm in a 95 Chrysler cirrus?

You disarm the alarm system by unlocking the doors with the key or remote.


How do you disable the alarm on a 2002 Chrysler Concorde?

The factory alarm can not be disabled. It can be reset by unlocking the doors with a key or remote.


Still have questions?

Trending Questions
Best foods for weight loss? Asked By Wiki User
How to lose belly fat? Asked By Wiki User
Unanswered Questions
Saan nagmula ang gitara? Asked By Wiki User
Uri ng tekstong nareysyon? Asked By Wiki User
Can you get Takis at 7 eleven? Asked By Wiki User