You didn,t say what year it was ? So I'll answer it like this.
I would make sure the SPEED SENSOR that's in the transmission tail shaft is working correctly. REPAIR as needed.
The transmissions MUST be the same YEAR and same kind.
If I new the year and what it was in, I may have given a different answer.
because your car is broken
The most likely culprit for a do-nothing parking brake is a misadjusted cable. Generally there is an nut that can be used for adjustment at the rear of the vehicle that will allow you to tighten or loosen the parking brake cable.
Chevrolet Blazer parking brake can be adjusted with the adjustment screw on the parking brake pad. The parking brake can also be adjusted with the parking brake cable.
how do you adjust parking brake
You can adjust your parking brake by turning the parking brake adjustment bolt. The parking brake adjustment bolt is located on the parking brake pad assembly.
Parking brake
The 1998 Chevy Corvette parking brake can be adjusted with the parking brake adjustment bolt. You can also adjust the parking brake cable.
The 2001 Chevy Cavalier parking brake has an adjustment bolt on the parking brake assembly. Turn the adjustment bolt to loosen or tighten the parking brake.
The 2000 Chevrolet Impala parking brake will have an adjustment bolt on the parking brake assembly. Turn the adjustment bolt to loosen or tighten the parking brake.
The parking brake light comes on when you engage the parking brake. Pull the parking brake release handle. ------------------------------------------------------------------------------- the brake light also comes on if the brake fluid level in the brake master cylinder is low ( in your engine compartment )
The integral brake is a parking brake that is on the inside of a disk brake system . This system use cables to engage the parking brake just the same a drum brake system.
The parking brake has an adjustment bolt on the brake shoe. The parking brake cable has adjustments on each end of the cable.