0
Why wont your Chevy truck crank after you just had your oil changed?
Wiki User
∙ 11y ago
"Crank" meaning the starter doesn't crank the engine over to start it, changing the engine oil should have nothing to do with it not starting. If the battery was weak and something was left on, it may have run the battery down.
Also check the engine oil level to be sure they put new oil back in or possibly left the drain plug loose and the oil drained out. If the engine was run with no oil in it, it could have seized the engine and it wouldn't crank over, in which case the engine is ruined.
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
You just put a Chevy 350 in your truck it will crank fine when cold but grinds at warm up?
could be bad bushings in the starter.
Is the crank and flywheel balanced on a 350 Chevy?
Just the crank. The flywheel is neutral.
Will a bed from a 1973 Chevy truck fit a 1958 Chevy truck?
no it wont just bolt on....
What happens when you have just changed the crank positioning sensor on a 2002 Chevy blazer 6 cylinder and it still will not start?
Was that the only code that caused you to replace it? Do you have it close enough to sense again.
How do you remove the window crank on a 95 Chevy Cheyenne?
There is a c-clipthat holds the crank in place,you just need to push it off and the crank comes off.
Where is a crank sensor for a 2002 Chevy Malibu?
Just below the PS pump
Will anybody parts from a 1986 Chevy truck fit a 78 Chevy?
YES, Just about everyone of them will.
Does a 1989 Chevy cavalier have a crank position sensor if so where?
its at back of engne just under the manifold
How do you remove crank sensor on 2000 Chevy 2.2?
Its located on the passenger side of the motor its easier if u get under the truck u can see next to the distributer cab just take electrical plug off and remove screw with socket make sure truck is cold saves u alot of burning.
What is the wheel bolt pattern of 1990 Chevy ss truck?
They are 5on 5 chevy just like all the others
Will a 94 Chevy 6.5 turbo Diesel transmission work with a Chevy 350?
yes just put one in my truck
How do you change a flywheel on a Chevy truck?
How do you change a flywheel on a Chevy truck? You can remove either the engine or the trans. Once you have either removed just remove the bolts holding the flywheel in place.
