answersLogoWhite

0


Best Answer

Multifunction switch is bad.

User Avatar

Wiki User

18y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Why wont your turn signals work on a 96 blazer when it's not a fuse and the flashers still work?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Flashers work turn signals dont fuse is good on 1995 s10 blazer-what's wrong?

because there are two diffrent flashers 1 for the flashers and 1 for turn


Why wont your turn signals work on a 95 blazer when it's not a fuse and the flashers still work you need help its a s10 4x4 if it helps?

The turn signals and hazards are on separate relays. You need to replace the signal relay. If that doesn't do the trick, look into your turn signal switch.


Your blinkers wont work but the hazards do in your 94 acura integra it is a fuse?

There are two different flashers on vehicles. 1 for the turn signals, 1 for the hazard flashers.


02 Monte Carlo turn signals not working but fuse is ok?

Turn the emergency flashers on and make sure that they are flashing at a normal rate of speed. Then turn your emergency flashers off and try one of your turn signals and it should work.


Is there a master fuse for the turn signals on a 95 Chevy Blazer?

Check the turn signal relay. The four way flasher and the turn signals each have their own relay. It has a fuse for the turn signal


What is wrong with a 2001 Nissan Xterra if the blinkers stopped working and the flashers still work?

I believe the flashers are on a separate fuse than the blinkers, that is where I would first start to look, is the fuse box


How many signal flashers are on a 1996 Honda accord turn signals and emergency flashers separate?

No, there is only one flasher which works both the turn signals and emergency flasher. It is located on the drivers side, under the dash, above fuse block, mounted on kick panel.


The turn signals and emergency flashers not working on 2000 Toyota Camry?

You need to check the fuse box, it everything is fine there. You have to test the relay.


Why do hazards work but turn signals don't?

For most vehicles the hazards and signals are two separate circuits, they have separate fuses and separate flashers. Check your signal light fuse and signal light flasher.


Your 1976 blazer k5 blinkers dont work new flasher FLASHERS WORK STILL NO BLILKERS?

Check the fuses aren't burnt first. Then remove lense and check bulb filaments if fine. Try your emergency flashers to see if they blink, if not THEN replace the flasher unit at the fuse box...easy to replace. Hope this helps.


Why do emerg ency flashers work and the turn signals wont blink on 97 f250?

The emergency flashers and the signal lights are separate systems. Each has it's own fuse, switch and flasher relay. If your turn signals light up but don't blink I would blame the signal flasher relay.


Why don't i have turn signals or flashers on the left side of my 1998 ford explorerAll bulbs and sockets are good?

One of the reasons why you may not have turn signals or flashers on the left side of your 1998 Ford Explorer if all the bulbs and sockets are good is you may have a blown fuse. Try replacing the light fuses or visiting an auto parts store to test the fuse to see if it is bad.