If you brakes are still squeaking after you change your brake pads in any car, you have a warped rotor. The squeaking is caused by the rotor vibrating when pressure is applied by the pads. The best way to permanently fix the problem is to replace your pads and your rotors at the same time. This can also cause accelerated wear on the new pads if you do not replace the rotors at the same time, or at least have them turned.
No
did you put high quality brakes on your car if so then it is normal do not worry about it. even if not some brakes just squeak all the time
Depends on the kind of pads/rotors you got. It's normal for some compounds to squeak .
The brake pads have a small metal piece which makes he brake squeak. This means it's time to change your brakes. The longer you let it squeak, the more damage it does to you rotor. Still the rotor can be resurfaced or if needed replaced.
I've greased that wheel, but it still has a squeak. I managed to squeak by the accident scene without a scratch.
If you didn't turn the rotors (have them ground to give a smooth, even surface), the uneven rotor face on the new pads may squeal.
Either someone left the sound suppressors off or/and didn't spray with the soundproofing.
If the brakes are not working on the back of a 1997 Dodge 1500 after changing the brake pads, try bleeding the brakes. The fault may also be with the master cylinder under the hood. Check to make sure all brake lines are connected.
Sounds as though you still have air in the cylinders at rear.
probably have a bad master cylinder.
Hey Ike==Ever since the EPA took away asbestos, this has been a problem. There are greases, shims etc that are designed to help but sometimes they don't. Make sure the person who replaced your pads used what the manufacturer suggested. GoodluckJoe
grease needs to be applied behind the rattle clip before rattle clip is put back on..need more info contact glennschevygirl@yahoo.com