if it is all the gauges it's probably a fuse, or just some, like speedo and odometer it could be a bad wire
The bushing are bad.
None from the factory
You can find a fuse box diagram for your 1983 Chevy Camaro in the back of the owners manual. You can also find the fuse box diagram in Chevrolet service manuals at your local library.
Check the vent on top of the transmission as it may be building up pressure and can not vent it.
what is curb weight of a 1983 Chevrolet Silverado 1500
yes they are of the same generation of camaro so it should be interchangeable
its around 107 hp, i have a camaro with a 2.8l v6
Chevrolet didn't make the Corvette in 1983.
The fuel pump on a 1983 Chevrolet Citation is under the hood. It is mounted on the lower part of the engine block.
Best choice would be a TH700-R4
The fuel pump relay of a 1983 Chevy Camaro can be found inside the relay fuse block. It provides power to the fuel pump.
Purchase a Haynes Manual that is for your car. It will show illistrations as to what to take off and what not.To replace the drivers side window on a 1983 Z287 Camaro allow approximately six hours. Remove the inner door skin and remove the rivets that attach the motor to the door. Slide the window out of track and unbolt the vertical track. Unplug the harness and retrieve the assembly.
Hose blockage, core blockage, disconnected heat valve.
On the driverside exaust manifold under the hood
google it on the net
Every car has a different weight depending on the vehicles specifications. The 1983 Chevrolet CK10 Pickup has a curb weight of 4000 pounds.
Chevrolet Celebrity uses negative ground, there is no positive ground.
The chances are that it will fit. If the 97 camaro originally had a v8 in it then you will have to change the motor mounts on it which can be a pain to do. Source: I stuck a 5.7L from a full size van in my 1983 camaro that originally had a 2.8 V6.
15 Gallons Im pretty sure....