If none of the brake lights are working i would suspect the brake switch at the brake pedal.
if turn signals are working , and brake lights not working, i would replace the stop light switch on the brake pedal
The BOO (Brake On/Off) Switch may need to be replaced. If it is bad, it would cause the brake lights to NOT illuminate when the brake pedal is applied.
That the lights need fixing maybe?? That the lights need fixing maybe??
Check your brake lights and see if they are working. Ford has it so if your brake lights are out you can not shift out of park.
burnt out lightbulb!
Check your brake light switch at hte brake pedal.
The brake lights and tail lights are separate wiring systems. Even some of the bulbs may have two separate bulbs in the same glass housing. If the bulbs are in fact working, then the next step would be to test the brake switch under the dash. When you depress the brake pedal the switch is pushed creating a connection to turn on the brake lights.
Check the bulbs - they are doubloe filamented with the smaller being for brake/turn signals Check the fuses
did you check the fuse?
Blown fuse, bulb, or bad brake light switch.
Check the bulbs, fuse & brake light switch on the pedal.
If the fuses and bulbs are okay I would blame the signal switch assembly. They call it a multi-function switch these days.
there was a recall on the brake light switch you might want to check into that
Taking your foot off the brake pedal...?
Is the light bulb inside burnt out. If so, that would do it.
I would suspect a ground problem. Saying that, check the brake light switch.
Brake lights often use a dual-filament bulb. If this gets inserted the wrong way other functions can suffer.
Check the switch on the brake pedal
Bad bulbs? Sockets corroded?
Blown fuse, both lights are burnt out, There is a wiring or ground issue.
I own a ford f150 and my tail lights are not working, but my brake work. What could wire or what could be causing that.
brake switch ???
Check bulbs Fuse Stop light switch
If all that is working it might be a short in you wiring. I would recomend checking by the light socket.