Wiki User
∙ 2008-01-02 00:14:51some of these newer vehicles are very sensitive in the way they are made and can let you know that they need to be checked as your vehicle has done, they are also programmed to let you know when a sensor is getting ready to go bad on you. Unfortunately the warning lights don't tell you which one is going bad, but these Chrysler, plymouth, Dodge vehicle do have a system on them that will blink a code to you. If you turn the key on and off 3 times and watch for the( check engine light) blinks, it may give you a hint as to what might be the prob, but you will need to buy a Hanes or Chilton manual from a parts store to get the codes, unless you know a mechanic, or go online to get them.
Wiki User
∙ 2008-01-02 00:14:51A scan tool is required.
aperantly take the light out
To reset the maintenance required warning light on a 1989 Dodge Dakota, unhook the battery connector cables for 10 minutes. Reconnect them and start the vehicle.
That requires a scan tool.
The maintenance light,You will need to take it to a Dodge dealer to reset it. Or get a DBR-2 code scanner.BIG $$$
Take the bulb out
Have a look at this link: http://www.wikihow.com/Replace-a-Tail-Light-on-a-Dodge-Grand-Caravan
it means when the maintenance light is on
yes
To reset the maintenance required light on a 1989 Dodge D50, disconnect the battery. Leave it disconnected for 10 minutes before reconnecting it.
What do the REQD light mean on my dashboard of my 1993 Dodge Dakota 3.9L Truck
It is time for some kind of scheduled maintenance. this could mean an oil change or timing belt replacement. Read your owners manual for the scheduled service intervals and compare it to your miles. A qualified mechanic can perform the work and reset the light, parts stores usually use the cheap code scanners so they may not be able to reset this light but you could try.