Standard temperature and pressure are not a condition that was discovered, but a condition that was decided as a standard for use in working with gases.
That would depend on the temperature "Temperature pressure relationship" and the fittings used
When the pressure increase also the temperature increase.The Gay-Lussac law is P/T=k.
check the freron
The speedometer and odometer may stop working in a Nissan Pathfinder due to an electrical short. It may also need a new spark plug.
my odometer sometimes working sometimes not working
motor is working but wiper blades do not move.
quit being stupid!
working under pressure working under pressure
No, That part will not shut the engine down
The gas (working fluid) having flown through the turbine does some work on the turbine, converting its thermal energy into mechanical work produced by the turbine and coming out as an expanding gas with lower temperature and pressure.
Temperature gauge not moved and the fan's always are working
Could be due to the fact that cooling fan is not working and excessive temperature is causing pressure rise.
The test pressure is always stamped on the cylinder along with the working pressure, physical volume, manufacture date etc. It is generally about twice the working pressure of the cylinder.
Xlpe maximum working temperature is 90 and minimum working temperature is 0 c
my question is what is the formula for pressure?
It is possible that the temperature gauge has stopped working in a 1992 Tempo due to a blown fuse. It is also possible that the temperature gauge stopped working do to the temperature sensor in the engine having a short.
Many people handle working under pressure in different ways. Some people are driven by the pressure and some are paralyzed.
If the interior and parking lights are not working on a 1999 Nissan Pathfinder, the first fuses to check would be the interior light fuse. Also check to make sure the light switch is in the right position to allow the interior lights to come on.
You must know Pressure, and Volume , and Temperature when making accurate measurements of Gas quantity. Most of the world measures gas pressure in KiloPascal, volume in Cubic Metre, and temperature in degrees Centigrade . It is essential to use all Metric units Or all Imperial units, but Imperial units are only used by the USA now. The volume of all gases, changes with change of pressure and also with change of temperature. That is why you must measure all 3 units referred to .
4,000 PSI working pressure
Sublimation is the transition of a substance from solid to gas without becoming a liquid first. To determine when this will happen you must find a phase diagram of the particular substance you are working it. There is something called the triple point, a particular pressure and temperature at which all three phases can technically exist. If you find a point below this, and a pressure and temperature at which a liquid wont exist whatever you are working with will go straight from solid to gas.