Why would the wiring for the headlights on a 1998 Sunfire GT keep buring out?
A GUESS WOULD BE IF IT HAS A BARE POSITIVE SOMEWHERE IT COULD BE SHORTING WITH ANOTHER WIRE OR THE BODY.OR THERE TAKING A BIG POWER DRAW WITCH SOUNDS LIKE A REGULATOR.THIS INFORMATION IS NOT GUARANTEED SIGNED A GUY WITH A 1999 SUNFIRE THAT HAS A DAY TIME RUNNING LIGHT PROBLEM F235
Why does your 92 Nissan maximas headlights turn off when the switch is turned on you bought new headlights today and that did not fix the problem would it be the switch or wiring?
This is a wiring issue. If the switch were the issue, the light would not turn on at all. Sounds like something is wired backwards, or there is a cross short. If there is a short to ground, you will be blowing fuses and possibly burning up relays. Consult your vehicle's wiring diagram to ensure the aftermarket headlights are wired correctly.
How do I fix my Pontiac sunfire low Beam headlights that will not turn on when the bulbs and fuses Ok but mechanic finds electrical problem exits in wire harness to bulbs is always hot with no ground?
I would first start looking at the ground connections aroung the headlight area. Follow the wiring harness from the headlights and eventually you will find where one of them is suppossed to be connected to the car body somewhere. It is impossible to tell you for sure where it is. It simple could have come loose or corroded. If all the grounds are connected then the computer module that controls the lights could have a…
What would cause low beam head light plug to get hot and melt on 02 trail Blazer Standard headlights. And how can I correct the problem?
Why would a 1994 Chevy Silverado 1500 stall when the headlights are turned on or the brakes are applied?
Why would a 1988 Ford Thunderbird's odometer work until you turn on your headlights then it goes completely dark until you turn off the headlights and it lights up again?
What would cause the blinkers to work intermittently on a 2003 Pontiac Sunfire and when you turn on the headlights they stop working?
Why don't my headlights work on my 1998 Chevy pickup.taillights do i replaced the switchstill don't work.?
Why would your headlights work on high bim only when you pull the turn signal to you but does not work on low bim or high bim when you turn on the headlights switch in a 1995 jeep Cherokee?
99 sunfire your daytime running lites dont work and when you put your regular lites on the right one stays dim?
I have (had) the same problem with my 2001 Pontiac sunfire. After doing research online, one explanation is that the wires in the wiring harness are so small that they easily corrode. On mine I tested the wires from the fuses to the lights and moved around the wires and after that they would work for a bit.
Why would a 96 Sunfire will only start when you turn the AC and the emrgency blinkers on and the lights on the panel will not turn off?
If both lowbeam headlights fail at once, it probably isn't the lamps themselves. That would be a fluke. The wiring is usually not at fault. It is vulnerable at the ends where the connectors are because they might become corroded. Check that last. That leaves the two other vulnerable points in the circuit: the fuse and the light switch. Check them out.
What else other than wiring would cause one of my injectors not to work oin a 1998 sunfire could it be the computer?
Why would the driver lights under the headlights stay on after you shut off the truck and switch on a Chevy Cheyenne?
Answer I had a similar problem when I put a CD player in my 92 explorer. The problem was that somehow I used the hot wire from the headlights. I simply just rewired the power wire and problem solved. First of all I would check the power source. If you didn't use a wiring harness some of the 12v power is discontinued when you turn the headlights on. Using either a voltmeter or testlight check…