answersLogoWhite
Clutches and Flywheels
VW Golf GTI
Vauxhall Frontera

Why would you have to push the clutch pedal all the way in and it is still difficult to change gear on Vauxhall Frontera 2.4?

666768

Top Answer
User Avatar
Wiki User
2009-02-27 22:25:29
2009-02-27 22:25:29

I had same problem so I changed clutch, no diference. found the plate the clutch pedal conects to had pulled away from bulkhead. rewelded to bulkhead and clutch was fine.

1

Related Questions

User Avatar

All fronteras have hydraulic clutches. No cables.

User Avatar

Check the bulkhead hasn't burst where the pedal box is mounted. Common fault.

User Avatar

Is this a manual with 3 pedals, one of which is the clutch? If so get someone who knows to show you how. It's not as easy as it might sound by reading and takes a good bit of practice.

User Avatar

Is is extremely difficult to change a clutch on a 2l hdi citroen xswara picasso car, as it is mounted directly into the main console which is generally unremovable.

User Avatar

how difficult is it to change a clutch on a freelander 51 reg td4 can any one give me any tips

User Avatar

my zafira clutch slipps in first gear after pulling away

User Avatar

with a good set of tools and 7.5 hours ive done 1 without removing sub frame

User Avatar

No big job mate. Gearbox to be removed. The last car to change a clutch without moving the gearbox was a Vauxhall Cavalier 1998/99.

User Avatar

hi i have a astra and the clutch seems high but vaxhall said its normal ?

User Avatar

The clutch is hydraulic, and as such self adjusting. There is no way to manually adjust it.

User Avatar

Normally this means the gear synchronizer is worn out or damaged. Usually the damage is caused by shifting without using the clutch.

User Avatar

absolute nightmare, unless your qualified get a mechanic to do it, trust me it takes hours

User Avatar

take the driveshafts off unbolt the gearbox and slide off to the right. clutch is then visible. about a 3 hour job not to difficult

User Avatar

This has got to depend on where you live and the labour rates at your local vauxhall dealer.It can be cheaper to use a clutch specialist but parts quality can sometimes be suspect.A ballpark figure is

User Avatar

See the related links for step by step instructions.

User Avatar

The raised centre faces the clutch cover mate. Flatter surface to the flywheel. The plate is usually marked "front" though.

User Avatar

You top it up via the brake master cylinder.

User Avatar

mines just snapped so its definitely cable....

User Avatar

clutch change method Nissan Almera

User Avatar

how to i change a clutch in a 1993 ford ranger

User Avatar

How-to change clutch cover on yamaha r1?


Copyright © 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.