Yes, it will.
It will fit a 15 x 7 or a 15 J rim
It means the rim will fit 15" tires with widths between 185 and 225. 15 inch diameter, 7 inches wide
They depends on ? what seize the tire is. Normally nothing bigger than a 225 is mounted on a 7inch rim.
You must know the answer is NO. Not necessarily true, we're talking about width I assume, the section width of the tire 10" in this case is measured at the widest part of the tire. The bead, the part of the tire that sits on the wheel, is significantly narrower. Just as an example P245/55R20, which is a 10" wide tire lists the apporved rim width as 7.0"-9.0", so depending on the exact size it is very possible that your 10" wide tire could go on a 7" wide rim.
Tire 245/50R18and Rim 8Jx18 ET30.
the R stands for RIM , Example R15 Is a 15 Inch Rim The R actually means it is a tire of Radial construction. The wheel & tire diameter is 15" but the width of the rim should be 7" to 8" for this size tire.
it should fit but it will be kind of ballooned out since its 2 inches wider and as long as you have the clearance on whatever the wheel goes to you should be fine but both wheels are 8 inch diameter,maybe you get lucky and the rim is 7 or 7.5 wide but either way it should fit fine
There's something missing from this question. Clincher refers to which type of tire the rim takes. 5 and 7 might refer to anything.
weighs about 500 pounds with rim
It's a wheel/tire dimension. 700 being roughly the outside diameter of the wheel with the tire mounted, and 23 being the approximate width/height of the tire when inflated, both measurements in millimeter. A tire with that marking will fit a rim with a Bead Seat diameter of 622 mm, and often also referred to as a 28" wheel.
The stock front tire size is 22x7x10. This means the tire is 22 inches tall, 7 inches wide, and fits on a 10 inch rim. The stock rear tire size is 22x10x9. 22" tall, 10" wide, 9" rim. The stock tire brand is Ohtsu.