93 is recommended
under the instrement panal, near the steering column
horn don't work a 1992 elderado, where is it or where is fuse panel for horn ?
yes
87 octane unless it's a later-model ETC, then 91-93 should be used
Absolutely
The pull down motor switch could be defective. Check for power to the motor
should be fine, they share the same body style: http://en.wikipedia.org/wiki/Cadillac_Eldorado#1992.E2.80.932002
NO vac pump in the '79 87&89 Brougham 85-87 deville 89-93 deville 86-86 eldorado 85-87 fleetwood 89-93 fleetwood 86-86 Seville
a 5.0 is a 5.0 anything from a 83 - 93 should fit
Sorry i had to delete your response Hub Yes for hub, he is absolutely correct. However not for a '92 into a '93. The problem is internal. The crankshaft is different in the '91-'92 engines. Because the timing of the fuel and spark is based of the crankshaft position sensor, the '92 in the '93 will NOT run. At all. you need a '93 - '94 engine. Or a '95 - '97 engine with an EGR adapter Correction, you CAN swap the motors as long as you also swap the computers
if you have the northstar engine it is located in the center of the block. you must remove completely the intake manifold to access it. if you have a4.9 it is under the left side near the a/c compressor