Yes, but it may draw too much current for the circuit. If it's a 15 amp circuit and the welder draws 17 amps, it won't work. Voltage is only a part of the puzzle.
Yes, Wall outlets in the U.S. are 120 volt.
I would say yes.. household power in the US is 110 to 120V depending on location from sub station most devices are set up to operate anywhere in this range
Yes, the range is 110 volts to 120 volts.
No.
'Voltage' is electromotive force, and the 'Watt' is a unit of power. You can plug a 240 watt appliance (light, toy, radio etc) into a 120 volt socket as long as the appliance is rated for 120 volt AC operation.
If it does not come with a plug on it, no. If it is made for direct wire, then 99.9% chance is that it is a 240 volt unit. If you plug it into a 120 volt outlet your water will barely get warm.
If the plug fits you are good to go. The typical range of residential voltage is from 110 to 125 VAC. You are fine within this range.
The answer is No for an iron that was sold only for use in US, Canada or other countries using similar household AC power supplies. Unless the iron has a switch on it, to allow it to be used safely in countries which use 220-240 volts as the standard household supply, a 120 Volt iron must only be used on the 120 Volt power supply that it was designed to use. If it does not have a switch to convert its voltage, it is highly dangerous to try to use a 120 Volt iron on 240 volts. If a fuse or breaker did not trip to break the power supply the iron and/or its flex would overheat so much that they would probably catch on fire - not only would that ruin the iron, it would be dangerous to you and your home! If you change the iron's US-type 120 Volt plug to a US-type 240 volt plug, the results would be much more dangerous because a 240 Volt circuit has breakers designed to allow a high current draw - such as for a kitchen range or a clothes drier - and those breakers may not trip to cut off the current if you could just plug in a 120 Volt iron without first changing its plug. That is why the iron has a 120 Volt plug and not a 240 volt plug!
Use a volt meter Plug a 120 volt accessory into it
Yes 110/120 volt is typical house current in North America
There is no remedy but to plug it into a 230 circut.
No.
No conversion needed. These are nominal voltages which range from 110 to 120 volts. It will operate fine on the outlet.
yes
NO
'Voltage' is electromotive force, and the 'Watt' is a unit of power. You can plug a 240 watt appliance (light, toy, radio etc) into a 120 volt socket as long as the appliance is rated for 120 volt AC operation.
Take the plug in your hand, and insert the plug into the wall outlet.
If you have a quadruple 110 v socket, it can be replaced by a triple 120 v socket.
115 Volt and a 110 Volt can be treated as the same thing. The electrical voltage supplied from your electric company is not exact and can be 120 Volt + or - 10%.
If it does not come with a plug on it, no. If it is made for direct wire, then 99.9% chance is that it is a 240 volt unit. If you plug it into a 120 volt outlet your water will barely get warm.