No. ... You absolutely cannot do this swap due to different transmissions bell housing bolt patterns. The frame stanchions for the 390 engine mounts would have to be swapped in to the '83. The 390 was discontinued in 1976 in the F250's so the 1977 had to have been swapped once before. Be sure the 1977 F250 you have is the correct year if, in fact, you actually do have a 390. Person above is an idot. Swap motor mounts, and swap engine. if you have a c6 trans in the f350 you be just fine.
No.
The 2013 Pontiac Trans Am comes standard with a V6 engine, rear wheel drive, five speed manual transmission, and rear spoiler. The engine can be upgraded to a V8 for additional cost.
NO.
With the help of an adapter plate and a wheelbarrow full of money, yes. It would be cheaper to swap the old engine and standard trans for a later model engine and auto trans.
sure, it's the same thing.
No
Im quite sure the trans has elec shift solenoids trouble with other sensors will cause trouble with trans. events, suggest diagnostics of engine computer.
no
NO, They will not interchange.
Yes. The flywheels are different, however.
Yes. You may need to reuse the 48 engine mounts and water pump and other accessories. Be sure to install a pilot bearing for the standard trans if the 235 was bolted to an automatic trans.
all engine parts yes soem interior yes some no body parts no what you trying to swap I'll be able to tell you if it will swap or not