Will a 2003 3.0 Ford Ranger transmission fit in a 1999 Ford Ranger?


Top Answer
User Avatar
Wiki User
2010-04-08 12:03:46
2010-04-08 12:03:46

it should fit as they both have the same engine but is it manual or automatic

User Avatar

Related Questions

Motorcraft MERCON ATF ( automatic transmission fluid ) is used in the 5 speed manual transmission of a 1999 Ford Ranger , according to the owners manual

The transfer case for a 4x4 is bolted to the rear of the transmission on your Ford Ranger

can you use a transmission from a 1993 ford ranger in a 2000 ford ranger?

According to the 1999 Ford Ranger Owner Guide : The 5 speed manual transmission takes ( 2.8 U.S. quarts of Motorcraft MERCON automatic transmission fluid )

You have a 1999 Ford Ranger 3.0.

1999 ford ranger has reverse, 1st and 2nd no drive , reverse quits when it gets warm , can you help diagnose

According to the 2003 Ford Ranger Owner Guide : It came from the factory with ( Motorcraft MERCON - V , automatic transmission fluid ) * the type used should be engraved into the automatic transmission fluid level dipstick

How do you remove the flywheel on a 1999 ford ranger

Look for information on 1999 Ford Ranger 3.0L as well. (Same vehichle.)

How do you replace a 2003 Ford Ranger radio

Updated --- No, because starting in 1994 ford started using Mazda engines. So the 1999 ranger will have a whole different transmission than the 1993. Incorrect.-------- Mazda has manufactured transmissions for the Ranger since 1988. The model numbers are the same from 1988 to present, M5OD-R1, with the exception of the 1997 to present 4.0 SOHC, which uses the M5OD-R1HD transmission.

No. Ford Rangers may have a variety of manufacturers parts in one engine. For example, my Ranger has a Mitsubishi motor with a Mazda transmission.

No. From 1983-84 Ford used the C3 transmission. A 1990 will not fit.

passenger side, at the back of the motor next to the firewall

If the trans is in a ford ranger it is more than likely a ranger trans

Will a 1997 Aerostar transmission fit in a 2000 ford ranger?

is there a recall on the timing belt on a 1999 ford ranger?

every 100k when using AMSOIL Synthetic Universal Transmission Fluid

There are several things that can cause your 1999 Ford Ranger to grind when you put it into gear. The most common cause is a lack of transmission fluid.

In my 2002 ranger, the starter is bolted to the bell housing on the driver's side of the transmission. there are two 15mm bolts holding it in.

The 1972 Ford Ranger pickup truck transmission holds 12 quarts of transmission fluid. The 1972 Ford transmission can only use a transmission fluid made for Ford transmissions.

An automatic transmission on Ford Ranger holds three quarts of transmission fluid. That is after you drain all the old transmission fluid out.

Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.