A Double Din stereo will fit in a 1993 Chevrolet Silverado 1500. It will take some modification and a new faceplate, but it will work.
No. The size of the factory radio is 1.5 din. In order to install a double din radio you will have to customize your dash (not easy) or purchase a custom dash (look on ebay). Unfortunately only a couple of people make the dashes so they aren't very cheap.
Yes it can you just have to buy a vehicle specific adapter. This will also work going from a double din stock stereo to a single din aftermarket stereo
Our corolla's have a double din stereo. first you will have to decide if you want a double din or single din stereo. then you will need a Toyota wiring harness and a single din dash trim or double din dash trim. stereo removal is quite simply
a double din stereo is a stereo that is twice as tall as a regular stereo
All Jeep Grand Cherokee ZJ's(1993-1998) have a 1.5 DIN stereo. It is most easy to get a single DIN kit and install a single DIN stereo, but many have opted to cut out a bigger opening and block off the center vents to fit a double DIN stereo. If you want a 1.5 DIN aftermarket stereo, you will be best off buying a marine stereo. Many manufacturers make 1.5 DIN Marine head units.
No it will not without some modification. Your stock opening is 1.5 din. So you will need to do some cuting to your stock bezel, and modify your mounting bracket.
Sure you can. DIN refers to a standardized radio/stereo size for vehicles (large enough to accept a CD). 1 DIN is the standard DIN specification. 2 DIN or double DIN refers to units that are twice as high as the standard DIN, half DIN is half high as 1 DIN. Check the player position height of your car carefully. If 50mm, you should get 1 Din Car stereo, and if 100mm, you should get 2 Din stereo. You can buy great 2 din stereo from Eonon.http://www.eonon.com/2-Din-DVD-Player.html?utm_source=wiki.answers.com&utm_medium=answer&utm_campaign=answer
No. Its 1.5 DIN
All double din. Double din is double din and is all the same size
A 2 din mp3 player is a in dash stereo unit for a car/truck, din is the standard that most automakers use for their stereo head units 2 din or double din is a unit whose dimensions are approximately 7" x 4" whereas a standard din is 7" x 2".
Using a standard screwdriver (thin blade), pry the bezel around the stereo away from the dash until you're able to pull it away (it snaps back in). Once the bezel's been removed, there are two bolts that hold the stereo in. Remove those, disconnect the antenna and wiring harnesses, and the old stereo is out. Installation of the new one depends on the model/size you're purchasing.