I'm assuming you're talking about the front fender, in which case, I'm 90% certain they are identical. The best way to be absolutely certain though, would be to grab your phone book and call a local salvage yard, they can tell you right away what's interchangeable and what's not.
yes, trim is diff, thats the only differance.
Yes.
Are there multiple years
Yes they are more than likely the same. They look the same on my 2 and 4 door 94 Cavaliers. You might also find that the fenders from the Pontiac Sunbird also fit as well.
The make and model of what part?
Mom is gay
The Sunbird can readily accept any GM 60 degree V6 or GM 4-cylinder engine including Quad4 and Ecotec engines. GM 90 degree V6 and Cadillac 4.1,4.5,4.9 engines will also fit, but only if you have a big hammer and are willing to deal with some fun suspension issues.
With different fender contours it would not be an exact fit
Have someone lift and shake the door while you watch the hinges to see if they are loose. If the hinge pins are worn, the door will sag and make it difficult to close. You also may need to replace the nylon bushing on the door strik pin if there has been too much weight when the door closes. The strike pins can be replaced but if you haven't already done one, you might want to have someone help you or do it for you. It happened to me. If you open the door, lift up and down on the bottom of the door to see if it loose where the door hinge is bolted to the fender. If it loose where it is bolted to the fender, you will need to tighten the bolts. If the nuts are stripped in the fender, take it to the body shop. What was stripped in my door was the nuts inside the fender that the bolts went into. You could just have a stripped bolt. I had the choice of taking off the whole fender to fix it or weld the door hinge tho the fender. I chose to have the body shop weld the hinge (much cheaper). They did a perfect job welding the hinge so the door fit and matched perfect. I bought the car used and the fit was better that when I bought it.
No only 1995-2004 will work Pontiac sunfire doors from 95-04 will work also but the door moulding and door panel will need to be changed
Yes the power door can be used as it is the same as your door but you will have to switch the hardware inside of the door and use your hardware from your non power windows, everything will fit from your door into the power door.
Will Pontiac Montana rims fit WHAT? Your question is not complete. What do you want to fit the Montana rims on?