answersLogoWhite

Top Answer
User Avatar
Wiki User
Answered 2011-09-13 17:36:18

In most cases the check engine light will come on after you put a new engine in it, it can come on for various reasons, In my case my check engine light came on because my oxygen sensor was reading the fumes from my exhaust in which came from my last engine. eventually iit will turn off but its good to get a diagnostic to be sure that they wouldn't have to replace your sensor

001
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0
User Avatar

Your Answer

Related Questions


Is the check engine light "ON" and if so have you had it diagnosed? Did you replace the fuel filter when you replaced the pump?


You will have to remove and disassemble the cluster


Engine coolant temp sensor. I would check codes if you have a ECT code replace the sensor. does the check engine light come on with key on engine off, If it doesn't replace bulb. If the engine light works check fuel preasure,


That is the check engine light.That is the check engine light.


To replace the check engine light bulb, you will need to remove the dashboard. Once you have removed the dashboard, the bulb for the light will be exposed and can be changed.



Please be more specific--there is no such thing as an "engine light". There is a Check Engine Light or Service Engine Soon light. You have to remove the instrument cluster to replace the bulb for this or any other instrument light.


The check engine light, on your Hyundai Elantra can be reset by removing the fuse. Keep the fuse out for 10 seconds and replace it to its slot.


Only the computer can tell what made your check engine light come on. It could be your battery. If your battery is bad, replace it and see if that solves the problem. If it does not, then you will have to connect your car to the computer and find out why the check engine light came on.


No. It is illegal, will cause a check engine light and running problems.No. It is illegal, will cause a check engine light and running problems.


Replacing the battery should not have triggered the check engine light. The check engine light comes on when there is a problem with the emission system. Saying that, I would drive it for a while to see if the light does go out. If the light does not go out have the ECU scanned to retrieve the trouble code. Then use this code to diagnose the problem.


No, oil level does not cause the check engine light.


The service engine light is the same thing as a check engine light.


for the check engine light go to autozone and they will diagnose your engine for free as for the speedometer you will proobably have to replace the speed sensor


If you turn on the ignition without starting the engine and the Check Engine light does not come on, the bulb has burnt our or has been removed. Replace the bulb.


The check engine light is the light shaped like an engine, or the light that states Check Engine (Soon). If this light comes on, it is time to see what the issue is with the engine.


I have a 98 mystique, and when the check engine light comes on, I simply disconnect the positive battery terminal for a couple of minutes. When I replace it, the check engine light is cleared. It resets the computer.


replace the bad sensor and it will turn off.



There is no reset button for the check engine light. You can have Mitz. do it for $$$ or you can remove the negative battery line for a few seconds and replace. That will reset the check engin light.


There are sensors all over the engine that can turn the check engine light on.


Remove the battery head(+v) for a while, then replace it and star the engine.


This is too cool if the engine had been running for awhile. Thermostat is stuck open which causes the system to stay in closed loop, thus setting the check engine light. Drain and flush the radiator, and replace the thermostat. You may have the have the Check Engine Light reset with an OBD2 scan tool. Ask an auto parts store to reset it after selling you the thermostat and antifreeze for the repair.


The easiest way to reset the 2006 Suzuki check engine light is to remove the fuse. Keep the fuse out for 10 seconds, and replace it to its original slot.




Copyright ยฉ 2021 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.