Will a front bumper from a 1984 -1987 Honda CRX dx or hf fit a 1987 Honda CRX si?
yes it will fit ther is no diff. in the cars ex. that the si has a sun roof and a diff motor but the bodys are the same\.
no considering the front is more boxy and wider in the front. the 1990 bumper is rounded to fit the 88-98 pickups , the suburban kept the box style until 1991. your best bet would be to find a 1973-1987 silverado,custom deluxe,cheyenne, or bonanza bumper or a suburban bumper from a 1973-1991 suburban
How can you pop the hood of your 1987 Honda CRX HF if the cable to the hood latch came loose and the bolts to remove the front end are under the hood?
my hood release cable broke in my 1986 Honda accord. We had to remove the front bumper, and the metal piece behind that, and we were able to remove the bottom of the hood latch, and now I drive it daily on the interstate held down with an alon wrench in the screw hole, and 2 bungee cords (just in case) never had a problem.
Where can you get almost all the information for a 1987 Honda Civic Si like firing order compression and timing etc?
How can you pop the hood of your 1987 Honda CRX HF if the cable to the hood latch came loose and the bolts to take off the front end are under the hood?
I had a very similar problem on my 1987 Civic sedan. You will need to jack up the front end, remove the flat plate just to the left of center behind the bumper, and with a long screwdriver locate and push up on the latch release. Once the hood pops open and you release the second safety latch, you will need to jerry-rig or replace the cable. Good luck.
that depends. does your 325e have a aluminum bumper or a plastic bumper? if it has the aluminum bumper, you should order new bumper shocks for an post face-lift 87 model. post 8/87. the reason? the shocks that fit aluminum bumpers are very long, and if u attach a plastic bumper, it will stick out too far. if the 325e has a plastic bumper, then everything will be as easy as detaching and re-attaching your…
Make Model Year Engine ACURA Integra 1986 4-1.6L F/inj. (16V) DOHC D16A1 ACURA Integra 1987 4-1.6L F/inj. (16V) DOHC D16A1 HONDA 1500 S 1987 4-1.3L 2 bbl. D13A2 HONDA 1500 S 1987 4-1.5L 2 bbl. D15A2 HONDA 1500 S 1987 4-1.5L 3 bbl. D15B2 HONDA 1500 S 1987 4-1.5L F/inj. D15A3 HONDA Accord 1979 4-1.8L 3 bbl. EK1 HONDA Accord 1980 4-1.6L 3 bbl. EF1 CAN HONDA Accord 1980 4-1.8L 3 bbl. EK1 HONDA Accord…
The gl 1200 model is from 1984 to 1987. The only difference that shows in my manual is valve timing and maybe a few other things, unless it is fuel injected, or the aspencade model. Otherwise I do not see a problem. If you have the engine on the bench, then might be a good idea to change the stator and check the clutch.