The 1999 Mazda 626 alternator is located on the right hand side of the engine. The alternator will be near the front of the engine.
It is built into the alternator...
Remove passenger side Rack and pinion arm and slide out Alternator .
The positive battery terminal cable will always run to the alternator- just follow it down.
Is it a belt? You're most likely hearing a slipping alternator belt. It should either be adjusted if it's loose, or replaced if it's glazed, worn or cracking.
It may be a bad new alternator or it was not connected properly. Have the alternator tested to see if it is actually good.
it's your alternator I just had the same problem its going dead causing it to use most of the battery power
try taking the bolt out for the motor mount on that side where alternator is and jacking the motor up.
will a 1997 Mazda 626 transmission or engine interchange with a 1999-2002 Mazda 626 transmission or engine
how many belts are in mazda 626
To change the alternator belt on a 1998 Mazda 626 you need to first loosen the bolt that is located in the center of the adjustment pulley. Next, turn the adjustment bolt to the left until the belt is loose and can be removed. Reverse the steps to replace with the new belt.
how do i troubleshoot my 1998 Mazda 626 distributerless no spark
Can a Mazda 626 engine fit in a Mazda MPV mini van?
all I want to know is what kind of refrigerant for 2002 Mazda 626
How do I get a replacement key for 2000 mazda 626?
Where is the thermostat located on a 1999 Mazda 626?
How do you install a rheostat in 1999 626 Mazda?
Here is a link for the 1995 Mazda 626 belts. : http://www.autozone.com/servlet/UiBroker?ForwardPage=/AZ/cds/en_us/0900823d/80/14/3a/3b/0900823d80143a3b.jsp
can 20 " RIMS FIT ON A MAZDA 626?
How much is a engine for a Mazda 626
Where is starter on a 4 cylinder mazda 626?
Remove the positive cable from the battery post. Remove the cables from the alternator. Remove the alternator wiring harness. Remove the belt by loosening the tensioner pulley. Remove the alternator retaining bolts. Reverse the process to install the new alternator.
how do i find timing marks for mazda 626 fs
How to check the transmission fluid in a 1995 Mazda 626
How do I replace ignition wires on my 98 Mazda 626 2.0L