Yes
brake drums should pull off if not rusted on.
Remove the wheels, pry the drums off.
Remove the wheels from your 1995 Toyota Camry. Remove the brake pads by removing the brake pad Springs. Tap on the brake drum with a hammer or mallet. Slide the brake drums off. Reverse the process to install the new brake drums and shoes.
first you have to take the wheels off of the van,and then you have to take the tension off of the brake shoes. Next you will be able to remove the rear brake drums off of the vehicle.You may have to tap them with a hammer to break them free.
remove wheels, release emergency brake and drums will come off.
start by taking the tires off
hammer my friend
Brake drums are not attached with fasteners, they just pull off once wheel is out of the way.
i have a 2002 eclipse gs and i have replaced the drums on mine. I am thinking that the year difference and model difference wont change the drums. For my car there were two holes in the drums when you take the tires off and i just had to get some bolts that fit in those holes and screw them in. That pushed the drums off the hub and i could change them. Although be careful when you get them loose and when you pul them off because depending on how worn they are the pads might stick to the drum and you might bend something in the assembly.
Remove the wheel and tap the drums at back with a 'deadblow' hammer, rotating the drum as you do this. The brake shoes tend to hold drums on.
Is it Coble rims fit on a Chevy S 10
The brake light switch is broken or out of adjustment. The brake light switch is attached to the brake pedal lever above the brake pedal pad.