When wiring a three-wire U.S. single or duplex 15 or 20 amp receptacle: GROUNDING (green or bare) wire goes to the green screw. NEUTRAL (white) wire goes to the silver screw. HOT (could be any other color, often black) goes to the brass screw. For a better understanding, check out the Related link PDF shown below. : IF YOU ARE NOT ALREADY SURE YOU CAN DO THIS JOB
SAFELY AND COMPETENTLY
REFER THIS WORK TO QUALIFIED PROFESSIONALS. : If you do this work yourself, always turn off the power
at the breaker box/fuse panel BEFORE you attempt to do any work AND
always use an electrician's test meter having metal-tipped probes
(not a simple proximity voltage indicator)
to insure the circuit is, in fact, de-energized.
The screw is actually only silver in color and it is where the neutral wire(s) get connected to, (white wire). the gold colored screw gets connected to the positive(black or red) wire(s). Green screw is for ground wire.
White is neutral and goes on silver colored screw, black is hot and goes on gold colored screw. The bare or green wire is ground and goes on the green screw.
Yes, that is the correct connection.
Do you mean a 3 wire receptacle? You say cable,are you talking like extension cord type or interior romex wiring? If romex, you should have a black, white and bare(green or ground)and possibly a red if a 4 wire . Connect black to gold on the receptacle,white to silver and ground to the green screw.
gold and silver
In typical American wiring the black wire on an outlet goes to the gold (copper) screw and the white wire goes to the silver screw. The ground wire goes to the green screw.
On a 110 volt circuit, Black is hot, White is neutral, Green or bare Copper is ground. . Connect Black to the gold screw, White to the silver screw, and bare copper ground to the Green ground screw on the receptacle. On a 220 Volt circuit Black & Red are both hot, each carrying 110 volts for a total of 220. White is Neutral and ground is Green or bare copper.
The screw is actually only silver in color and it is where the neutral wire(s) get connected to, (white wire). the gold colored screw gets connected to the positive(black or red) wire(s). Green screw is for ground wire.
I do not know what you mean by long slot. The bare ground copper wire connects to the green screw or the ground screw. The black wire attaches to the copper or gold colored screw and the white wire connects to the silver or chrome screw. Both the gold and silver screws are on the side of the outlet. The ground screw will be on one end of the outlet.
The hot screw on a Porcelain socket or and electrical is the Gold screw. The Silver screw is the neutral
White is neutral and goes on silver colored screw, black is hot and goes on gold colored screw. The bare or green wire is ground and goes on the green screw.
Price is a major consideration!
Silver is mined in the ground in the same way that gold and copper is.
Yes, that is the correct connection.
Black wire to gold screw, white wire to silver screw, ground to green screw. If you are using a GFIC outlet then the hot wires coming in hook to the Line side of the GFIC receptacle and the wires going out to other receptacles hook to the load side.
Do you mean a 3 wire receptacle? You say cable,are you talking like extension cord type or interior romex wiring? If romex, you should have a black, white and bare(green or ground)and possibly a red if a 4 wire . Connect black to gold on the receptacle,white to silver and ground to the green screw.
gold and silver