it is really easy u get a half inch drive wrechit and there is a tentioner on it. u pull that back with the half inche drive wrechit and pull ur belt then do the same to put it back on
get someone that knows what they are doing, to replace it the 2 long front engine mount bolts need to be removed to replace serpentine belt
Take it to someone who knows how, unless you're a certified Ford mechanic.
Serpentine belts for cars may be purchased from auto parts stores like Auto Zone, while serpentine belts for vacuum cleaners may be found at stores like Bed Bath & Beyond. Businesses that service vehicles, such as Express Lube and Chicagoland Jiffy Lube, may also replace old serpentine belts.
valve adjustment should be done only by someone with experance,lifter replacment only by a mechanic ether done wrong will be very costly.
Take it to a mechanic cause if you have to ask your not qualified to touch it and if you don't know what your doing you could kill yourself or someone else
call 989-482-7376 ask for mr. hankins he has the answer
This is an extremely comlplex process best left to someone with experience. It will take a good mechanic most of a day to do this.
you havee to remove the lower bolt on the motor mount to get enough clearance to slide it through take it to someone its faster and easier that way
You should do it, they unplug are on top of the engine and are 2 screws. but not much, just go to someone honest.
A Mechanic.
Mechanic
The instructions are in the repair manual for that car. You can purchase one at most auto parts stores.