i neved heard of that, but if you clean the valve , you're going to improve your car's idle, and it's a great idea to clean it or change it eventually
test the egr valve push plunger in and out . It should not be too tough to do, if it is it may be stuck or plugged. should be on the right side of the intake manifold.
Before starting to repair the air intake system the battery should be disconnected. Once you have replaced it, then verify there are no holes in the intake tube, check for blockage or an excess water.
You should have a modem plugged to the xbox Internet slot. Have all your Ethernet cables and DSL plugged and have the Internet plugged in and switched on
Answer: Any device which exceeds a computer's VA/Watt rating should not be plugged into the outlets. Most printers can be plugged into a power strip. A laser printer, however, should be plugged directly into the wall.
Having plugged ears should not cause any of these problems. If you are having these problems, it is most likely the cause of your plugged ears and you should advice from a physician.
intake tube be for what?
When reducing fat intake, the emphasis should be placed on lowering intake of what
no, u should not hear anything when block heater is plugged in
true
You should leave it plugged in over night. There are too many variables to consider like cooling system capacity, freeze point of coolant & ambient air temperature, to be able to let you know what the minimum of time it needs to be plugged in to reach full effectiveness.
Intake bolts should be torqued to 35 ft lbs in the appropriate sequence. There should be 12 total "intake" bolts
Yes you should have it on your charger when you are at home and not using it