call the locksmith back.
You cannot copy it your self you need a locksmith or the dealer to program it.
Nissan transponder keys cannot be programmed by the vehicle owner. Contact an automotive locksmith or the dealer.
I'd call a locksmith. They will be able to tell you the exact problem and how to fix it.
Call a locksmith. They have the tools necessary to take the lock apart and pop the key out. Or at least they have the tools to pull the key out - perhaps without taking anything apart.
The dealer should be able to make a duplicate just from the VIN # for the car.A locksmith can make a key for just about anything legal, but he usually has to go to the car. Write down the VIN# and call a locksmith with it. If he cannot get it for you, then get a price for his coming out to the car, and get a price from the dealer. Compare these and choose.
Becoming a locksmith is very difficult and cannot be done via the internet. The only way to become a locksmith is to take time and go to a locksmithing school.
Answer The key has to be in the accessory position then you have to push hard on the pin as you are pulling on the key wiggling the key will help loosen it If key will not turn to accessory position you will have to drill out cylinder.If you don't want to do this a locksmith is cheaper than the dealer
A non-certified locksmith cannot purchase all of the same tools as a professional, certified locksmith. There are some tools, such as bump keys, that are only legally allowed to be sold to locksmiths.
I cannot confirm that the new Braunfels TX Locksmith is the best choice in Braunfels Texas as it depends on individual needs and preferences. However, it's true that having a mobile locksmith service that is available 24/7 can be convenient for customers who need a locksmith ASAP.
no he cannot
The removal procedure for the ignition lock cylinder entails using the key to turn the cylinder to the ACC position, inserting a pin into the small hole on the front, and continuing to turn counter-clockwise. If you simply don't have a key, you could have a locksmith make on based on one of the door locks, assuming they are keyed the same. If the cylinder is jammed due to parts of a key being inside, and you cannot remove them, the typical solution (for any lock) is to drill out the cylinder by drilling a small hole that renders the pins and the necessity of a key useless. Once again, a locksmith's job.
One source says 6100 lbs. for a 1994, but I cannot confirm this. The oldest weights I can confirm are 2006: Silverado 1500 6900 Silverado 1500 SS 6200 Silverado 1500 HD 8600 Silverado 2500 HD 9200 Silverado 3500 HD 11400