Hey Doug==Something is wrong with the controler. Go to the dealer and he can read codes which will help in diagnoising and repair. GoodluckJoe I have this occasionally (rarely), when driving in heavy rain or through a puddle. I simply turn the AC off and back on again by pushing on AC button (the blinking one). AC usually will wotk immediately and normally. Good luck, Olav.
Loose wire or bad connection to light.
The A/C light blinks because the A/C computer is not "seeing" the compressor shaft turning. Probably a relay fault but could be a bad mag clutch, broken wire, siezed compressor, faulty compressor speed sensor,,,the list goes on and on.
change the bulb out for the brake light and that fixes the problem.
get a haynes manual at a library
Deon
Normally there is 2 gallons left in the tank.
Susan Blinks was born in 1957.
NEVER
An owl blinks one eye at a time
Cat is "smiling" at you when it blinks so I have heard. Cat is also happy.
After much research, here is a step-by-step for getting your Vizio Soundbar to work with the Comcast remote using EFC codes (mine is the newer charcoal grey one, works great!) Aux - Setup (2 blinks) - 11144 (2 blinks) Aux - Setup (2 blinks) - 994 - Setup - 00169 - Vol Up - Should get 2 blinks Aux - Setup (2 blinks) - 994 - Setup - 00168 - Vol Down - Should get 2 blinks Aux - Setup (2 blinks) - 994 - Setup - 00037 - Mute - Should get 2 blinks Aux - Setup (2 blinks) - 994 - Setup - 00165 - Power - Should get 2 blinks Aux - Setup (2 blinks) - 994 - Setup - 00164 - Input - Should get 2 blinks These are optional, I didn't use them: Aux - Setup (2 blinks) - 994 - Setup - 00036 - <button to use for TVOL> - Should get 2 blinks Aux - Setup (2 blinks) - 994 - Setup - 00101 - <button to use for TSHD> - Should get 2 blinks Then set the volume control on the remote and other settings according to the Remote's manual. ENJOY!! Hope this helps someone...
After much research, here is a step-by-step for getting your Vizio Soundbar to work with the Comcast remote using EFC codes (mine is the newer charcoal grey one, works great!) Aux - Setup (2 blinks) - 11144 (2 blinks) Aux - Setup (2 blinks) - 994 - Setup - 00169 - Vol Up - Should get 2 blinks Aux - Setup (2 blinks) - 994 - Setup - 00168 - Vol Down - Should get 2 blinks Aux - Setup (2 blinks) - 994 - Setup - 00037 - Mute - Should get 2 blinks Aux - Setup (2 blinks) - 994 - Setup - 00165 - Power - Should get 2 blinks Aux - Setup (2 blinks) - 994 - Setup - 00164 - Input - Should get 2 blinks These are optional, I didn't use them: Aux - Setup (2 blinks) - 994 - Setup - 00036 - <button to use for TVOL> - Should get 2 blinks Aux - Setup (2 blinks) - 994 - Setup - 00101 - <button to use for TSHD> - Should get 2 blinks Then set the volume control on the remote and other settings according to the Remote's manual.