try a new hazard switch. the power runs through this switch, and sounds as if it is burnt. Good luck.
Defective flasher relay.
It may no be your blinkers. When the blinkers aren't working, gently move (without pushing it so the hazards come on) the hazard light (red) button on the dash above the radio. If the blinkers start to work again, replace the hazard switch
turn signal relay is bad
If the lights come on but just do not flash, then replace the flasher relay. If they do not come on check the bulb and fuse.
This bike does not come standard with hazard lights. There are many vendors that sell add on kits that can supply hazard lights. Two of the top web sites are jpcycles.com and denniskirk.com
Probably a faulty hazard light switch.
wiggle the hazard button if it works you need to replace the turn signal control arm and hazard button they come all in one piece
Some vehicles has a flasher relay for the turn signals and another one for the hazard lights. Are you sure you replaced the correct one?
If the lights come on but do not flash, replace the flasher relay. If they will not come on check the fuses.
where do most federal government dollars come from
check the interior switch for where.