check all fuses and relays first, if it is not this it will be the fuel sending unit which should be in the gas tank
I have a 1999 s-10 my fuel gauge quit working I had to replace my fuel pump that fixed my proplem
fuel gauge not working
a mechanic told me that the fuel pump has a loose ground wire low fuel to current fuel level over and over again. my 2000 did that
A common cause for a gas gauge to stop working in a 1994 Ford Aspire is a defective fuel gauge. Lose wiring in the dash is another cause.
Start with the fuses. Check the fuel sending unit at the fuel tank, this is the most common part to cause a non working fuel gauge.
In most cases the fuel gauge sending unit inside the fuel tank is at fault.
bad or dirty float on the fuel pump in the gas tank.
Don't know about the fuse, but the most likely cause for your fuel gauge to quit working is a bad sender unit. You are going to have to drop the tank and replace the whole fuel pump assembly (you can't buy the sender by itself) Don't know about the fuse, but the most likely cause for your fuel gauge to quit working is a bad sender unit. You are going to have to drop the tank and replace the whole fuel pump assembly (you can't buy the sender by itself)
It is to prevent the fuel from sloshing back and forth. Fuel sloshing can cause the fuel gauge to be erratic.It is to prevent the fuel from sloshing back and forth. Fuel sloshing can cause the fuel gauge to be erratic.
either the fuel gauge needs replacing or the fuel gauge sending unit in the fuel tank is stuck
fuel gauge not working and power windows and radio.2004 mercury mountaineer.
Bad dash ground.
Bad sending unit in tank.
Fuel gauges are factory set and are not adjustable. If inaccurate fuel levels are experienced the most likely cause is a bad sending unit.
A blown fuse can cause your fuel gauge and speedometer to stop working. Replace the fuse. The fuse can be found in the fuse box. The location of the fuse will be listed on the inside cover of the fuse box.
No it is not working.
Several things can cause the fuel gauge to stop working. 1.The sending unit in the fuel tank may be malfunctioning or broken. 2.There may be a broken, disconnected, or grounded wire going to the fuel pump/sending unit. 3. There may be a disconnected wire at the gauge cluster, or the gauge cluster itself may be malfunctioning.
Clogged fuel filter, defective fuel pump, blown fuel pump fuse, defective fuel pump relay, or it is out of gas and you have a faulty fuel gauge.
One reason for a gauge not working is a broken part either in the fuel tank or between the fuel tank and the dashboard - keep looking
after u drop the tank and replace the fuel sending unit your gas gauge should start working correctly. try jcwhitney.com they seem to have the cheapest price on the unit and pump combo.
make sure that floating thing in the fuel tank is position right or working. The fuel gauge won't be working right if its stuck in one position. Hope that helps...
connect a diagnostic scanner and see what fuel percentage is showing.
It's not fused separately. If your fuel gauge isn't working, you either have faulty wiring to the gauge, or a faulty fuel sending unit.
A faulty fuel gauge sending unit in the fuel tank could cause that.