answersLogoWhite

0


Best Answer

Start by replacing the Flasher Relay.

User Avatar

Wiki User

16y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Your hazard lights are stuck on at night but they do not flash you can use your left blinker but not your right During the day everything works fine What can you do to fix this?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Where the hazard lights on a Harley?

Press both blinker directions at the same time.


What is the problem when the car has no blinker or hazard lights on a 1998 ford escort zx2?

A simple first step would be to check the fuses to these lights, then go from there.


How do you fix brake lights on both sides When my blinker and everything else work?

Check the switch


Brake lights out on 1997 Suburban fuse is good Tail lights turn signals and hazard lights work I checked the fuse its good?

check the brakelight switch. it is located under the dash where the brake pedal rests. Hey its ritchie. If you can click your blinker down and then they work its you blinker switch,but this is my monte.


Blinker lights in a 84 celebrity How do i check the blinker lights and what fuse is it The blinker comes on but doesn't blink?

It has been my experience that when the blinker comes on but the lights don't blink there is one or more bulbs burned out. If that is not the case check the flasher.


How do you alert oncoming traffic of a accident?

Put on your hazard blinker lights so that oncoming traffic will be looking for a dangerous situation ahead and will drive more carefully.


No brake lights or blinkers and hazard lights?

my daughters 1991 miusbishi montero has no break lights , turn signals or hasard lights . All tail lights and front markers are working. All fuses are cking good and all bulbs are good..Is my blinker switch bad ? capri


My hazard lights have come on and I cant switch them off on my Peugeot 406 diesel estate. I used the car last night and everything was fine. when i got up the hazard lights were flashing.?

check the interior switch for where.


Why do the blinker lights and brake lights work but tail lights don't work on 1987 ford ranger?

The tail lights are on a separate wiring than the blinker/brake lights. Look for a blown fuse or a broken/loose wire.


How do i get the fog lights to work if i replaced the blinker with the blinker and fog light combo and there is not a fuse for the fog lights on my 2006 grand prix?

cheack the wireing


Do you have to use your hazard lights when backing up a 100 ft on the road during a driving test?

When backing up more then 30 ft. you are required to activate your hazard lights when backing up. So yes, if you are backing up 100 ft. you have to use your hazard lights.


Your brake blinker and hazard lights dont work you changed the fuse in the fuse box you changed the brake light bulbs and you changed the the oob switch on the brake pedal what could it be?

Have an electrician check the wiring that goes to the brake lights in the trunk of the car.