Is the 4.10 pulling 33ft
These were the options in 2000: [DMC]=Axle Ratio - 3.21 [DMD]=Axle Ratio 3.55 [DMF]=Axle Ratio 4.10 [DMH]=Axle Ratio 3.92 These were the options in 2000: [DMC]=Axle Ratio - 3.21 [DMD]=Axle Ratio 3.55 [DMF]=Axle Ratio 4.10 [DMH]=Axle Ratio 3.92
Check the SPID in your glove box. one of the G** Codes will be the rearend ratio G80 means you have a locking(posi) Rearend. GU2 AXLE REAR , 2.73 RATIO GU4 AXLE REAR , 3.08 RATIO GU5 AXLE REAR , 3.23 RATIO GU6 AXLE REAR , 3.42 RATIO GU7 AXLE REAR , 2.77 RATIO GU8 AXLE REAR , 3.90 RATIO GT2 AXLE REAR , 4.77 RATIO GT3 AXLE REAR , 4.55 RATIO GT4 AXLE REAR , 3.73 RATIO GT5 AXLE REAR , 4.10 RATIO Anything else, let me know, I'll look it up. (cortex454 at gmail dot com
Depends on each individual truck. Look in your glovebox....there is a label from the factory with parts codes on it. The one with G refers to your gear ratio/ ring & pinion. GQ1 -- AXLE REAR, STD RATIO GT4 -- AXLE REAR, 3.73 RATIO GT5 -- AXLE REAR, 4.10 RATIO GU4 -- AXLE REAR, 3.08 RATIO GU5 -- AXLE REAR, 3.23 RATIO GU6 -- AXLE REAR, 3.42 RATIO G80 -- AXLE REAR, LIMITED SLIP (POSITRACTION)
I believe the axle code is listed on a sticker on the end of the drivers door The axle code will correspond to an axle ratio Once a person knows the axle code , the ratio can be looked up
Axle code? there are usually labels or tags on the axle with ratio and part numbers on them.Axle code? there are usually labels or tags on the axle with ratio and part numbers on them.
the lower your rear axle ratio, the worse your mileage.
axle ratio cade for ford super duty”
The axle ratio on a 1969 Ford Mustang axle was 2.75:1
The ratio is on a tag on front and rear axle between 2 of the cover bolts
To check the rear axle ratio on your Suburban, you need to safely jack up the vehicle to get access to the the rear axle. Then there should be a metal tag on one of the bolts on the rear axle cover indicating the axle ratio. The ratio varies with different options and load capacities, so it's not the same for all Suburban's.
I believe axle code 19 is for a Ford conventional axle ( non limited slip ) with a 3.55 ratio
On a 2003 Ford Explorer : Open the drivers door and there is an information sticker on the latch pillar You will find the axle code under " axle " Once you have the axle code you can determine the axle ratio