The wiring order for the distributor cap on a 1993 Jeep Cherokee is going to depend on what size motor it has. The 6 cylinder motor firing order is very different from the 8 cylinder motor.
Firing order for you're Rocket engine is 18436572 distributor rotation is counterclockwise. Cylinder one on the distributor cap points to cylinder one.
start from far right spark plug hole to the far right bottom distributor then the next one to that spark plug cylinder to the left of the distributor you just did then the next cylinder across the the closes one last one right next to it should be the location
#1 is front cylinder, distributor rotates clockwise, firing order is 1342, timing is 6 btdc
in what order are the spark plug wires on the distributor cap on a 1998 dodge Dakota 6 cylinder
Count two diodes from the distributor plugs (clockwise) that is number one. The firing order is 1 8 4 3 6 5 7 2 (clockwise) This is all regarding you have an hei distributor. If not its the same firing order, but the number one plug should be the one that points at the drivers headlamp, or no. 1 cylinder
The firing order is 1,3,4,2. The number one is the one closest to the drivers side tire. There is usually a mark, sometimes an A or A1, on the top of the distributor cap indicating the number one cylinder.
#1 is drivers front firing order is 18436572 distributor location is clockwise
The 300 cubic inch straight 6 cylinder firing order is : 1 - 5 - 3 - 6 - 2 - 4 The distributor rotor turns CLOCKWISE
The wires are connected to each cylinder from the distributor. The distributar cap has an R and an L with a number. Use the L numbers for the drivers side and the R numbers for the other side. Fror example on wire with the labled R2 L3 on the drivers side would terminate at cylinder 3.
The wires are connected to each cylinder from the distributor. The distributar cap has an R and an L with a number. Use the L numbers for the drivers side and the R numbers for the other side. Fror example on wire with the labled R2 L3 on the drivers side would terminate at cylinder 3.
1-8-4-3-6-5-7-2 odd# cylinders on drivers side/even# cylinders on passengers side. distributor turns clockwise, #1 wire should point towards #1 cylinder if distributor installed properly