0
What else can I help you with?
The brake lights dont work but the normal lights in the back work what could be the problem?
Brake pedal switch, wiring, bulbs, bad trailer harness (if there), fuses...
If a 2000 GMC Jimmy's engine stopped in the middle of a highway and all things power in the vehicle stopped working including the engine but the radio and lights whats the problem?
check fusable link in wiring harness this is between battery and firewall if this is burned out ,you have a serious electrical problem if not that, check computer
What is the penalty for illegally installing projection lights in a person's residence?
More info needed. Illegaly installing WHAT kind of lights? And.., why would they be illegal?
What is wrong on a 1997 Cadillac Catera if the brake lights go out?
It depends. You may need a new Brake harness. It's an electrical problem you have ti get it looked at.
What is the recommended distance for installing recessed lights from the wall?
The recommended distance for installing recessed lights from the wall is typically around 12-18 inches.
Do I need to remove ballast when installing LED lights?
Yes, you typically need to remove the ballast when installing LED lights to ensure proper functioning and efficiency.
What could be the problem with a 1999 Avalon Toyota the dash clock is dimming and flashing no dome lights and the keyless system is not working Car battery is new battery on keys new?
There is a recall out for the security system wire harness. Take it to a dealer who can check the harness and replace it - some 1600+ Toyota had the faulty harness.
Where is the wiring harness to hook up trailer lights on a 1990 Chevy G20?
Auto parts stores can sell you a trailer harness that plugs in between your existing truck harness. The electrical connection used is usually located behind the rear bumper on the inside of the left frame. Directions will come with the trailer harness kit.
What is the color code for wiring a harness for a trailer on a 1989 aerostar?
Problem with it is the ground wire wont hold a load on a trailor with more than two lights-----ground it yourself to frame
If the daytime running lights are out on 1995 Pontiac Sunfire gt but headlights work DTR light in dash comes on and is flashing when running lights what might be wrong?
same problemit maybe broken and cracked wires which is located in the headlamp wire harness. the harness may need to be replaced. Pink wire in the harness where it passes between the frame and windshield washer bottle is corroded.....easy fix.
You tried to replace fuse for radio in 97 crown Victoria but it keeps blowing..everything else works but radio and interior lights whats the problem?
A radio fuse might keep blowing if the radio itself needs an inline fuse in a 1997 Crown Victoria. It is possible that the radio and interior lights are not grounded properly. Installing an inline fuse between the radio and the fuse box may solve the problem of the fuse blowing.
What are the best practices for installing insulation around can lights to ensure energy efficiency and fire safety?
When installing insulation around can lights, it is important to use insulation that is rated for contact with the lights to prevent fire hazards. Create a barrier around the lights using non-combustible materials like metal or mineral wool to maintain fire safety. Additionally, leave a gap of at least 3 inches between the insulation and the lights to prevent overheating and ensure energy efficiency.
