If you don't have a service manual, go online to Autozones Web Site - Repairs - and look up a step by step procedure for this. You'll need a steering wheel puller and a few other tools. BE CAREFUL - the airbag is in there!
To remove the ignition switch from a 1970 Chevelle steering column, first ensure the battery is disconnected for safety. Then, remove the steering wheel, and disassemble the column cover to access the ignition switch. Locate the switch at the base of the column, disconnect the wiring harness, and remove any screws or bolts securing the switch in place. Finally, carefully pull the ignition switch out of the column.
Lower the steering colunm. the ignition switch is located on the top of the steering column about 6 inches from the firewall.
On the steering column
The ignition switch is located on the steering column right side, just below the steering wheel.
Disconnect the negative battery cable. Remove steering column covers Disconnect the electrical connector from the ignition switch Remove the screw retaining the switch to the steering column
To change the ignition switch on a 1985 Camry, first disconnect the battery to ensure safety. Remove the steering column cover by unscrewing the screws, then locate the ignition switch, which is usually mounted on the steering column. Disconnect the wiring harness from the switch, remove the mounting screws, and replace it with the new ignition switch. Finally, reassemble the steering column cover and reconnect the battery.
On a 2001 Corvette, the ignition switch is located on the steering column, just behind the ignition lock cylinder. To access it, you typically need to remove the steering column covers. The switch is usually mounted to the column and is connected to the ignition lock, allowing the vehicle to start when the key is turned.
On the steering column????
disassemble the steering column cover. It's the plastic thing under the steering wheel. The switch housing is held in place with a big metal clip. gently take it apart, take off the wires and replace the switch.
In the 1997 Ford Aspire, the ignition switch is typically located on the steering column. You can access it by removing the steering column cover, which is secured by screws. The ignition switch is mounted near the base of the steering column, where the ignition key is inserted. Always ensure the vehicle is off and the battery is disconnected before attempting any work in that area.
To remove the ignition switch from a 1997 Lincoln Continental steering column, first disconnect the negative battery cable to ensure safety. Then, remove the steering column covers by unscrewing the necessary screws. Locate the ignition switch, detach any wiring connectors, and unscrew the mounting screws securing the switch to the column. Finally, carefully pull the switch out to complete the removal process.
To replace the ignition switch on a 2000 Oldsmobile Intrigue, first disconnect the battery to ensure safety. Remove the steering column covers and locate the ignition switch, which is typically mounted on the steering column. Unplug the wiring harness from the old switch, unscrew it from its mount, and replace it with the new switch. Finally, reassemble the steering column covers and reconnect the battery.