0
What else can I help you with?
Replaced universal joint in Chevy s-10 truck and now have vibration?
Must not be installed correctly. If the joint is not perfectly centered it will vibrate.
What does a bad universal joint feel like on a s10 truck?
when you change directions from forward to reverse it makes a clunk sound and there is a slit delay in movement.
How to change the starter on a 310 Chevy truck?
There is no such thing as a 310 Chevy truck.
How much does the labor cost for changing universal joint on a 2002 avalanche truck?
Labor costs can vary depending on the location and mechanic, but on average, you can expect to pay around $100-$200 for the labor to change the universal joint on a 2002 Avalanche truck. It's best to get a few quotes from different mechanics in your area to find the best price.
How do you change a light on a steering column in a 2006 Chevy truck?
How do change a light on a steering column in a 2006 chevy truck?
How do you replace front cv joint 2002 Chevy 3500 truck?
A chevy 3500 truck is not front wheel drive, so it does not have CV joints.
I believe these are just pressed in from the factory. It has a piece of plastic sticking out of the end of the yoke eye. How do you replace a universal joint on a Chevy S 10 truck?
I heat the yoke eye and joint cap with a torch until the plastic oozes out then press the joint out as usual. The replacement joint will have regular retaining clips to hold the joint cap in place.
What would cause a clunk under your truck when you switch gears?
A bad universal joint is one possibility.
My manual trans on my 94 Chevy 1500 is leaking from the back seal by the drive shaft. I now notice a clunk from underneath the truck when I ease on the clutch and stop. Is it something in the trans?
The universal joint(s) on the driveshaft are bad.
How do you change a 1965 Chevy truck fuel pump?
remove the bed of the truck.....
Well a 94 Chevy truck 350 fit in a 92 Chevy truck?
yes you might have to change your exhaust manifold
How to remove a lower ball joint on a 1995 Chevy s-10?
Remove the tire and wheel from your 1995 Chevy S 10 pickup truck. Remove the ball joint retaining nut. Pound the ball joint out with a hammer.
