0
To change the left-hand CV axle on a 1989 Ford Festiva, first, safely lift the vehicle and remove the left front wheel. Next, disconnect the lower ball joint and remove the axle nut from the hub. Slide the axle out of the transmission after disconnecting it from the hub assembly. Finally, install the new axle by reversing the disassembly steps, making sure to torque all fasteners to the manufacturer's specifications.
What else can I help you with?
Were do you find an 89 Ford Festiva axel nut?
Buy a new CV Axle Halfshaft and a new axle nut comes with it.
How do you replace front axle on a 1993 Ford Festiva?
To replace the front axle on a 1993 Ford Festiva, start by lifting the car and securing it on jack stands. Remove the wheel, then disconnect the brake caliper and rotor to access the axle. Next, detach the axle from the hub and the transmission by removing the retaining bolts or clips. Finally, install the new axle by reversing the steps, ensuring everything is tightened to the manufacturer's specifications.
How do you replace cv joints on a 1993 Ford Festiva?
It is best to replace the whole axle, Its easy to do not to mention pretty inexpensive....
Do you haft to pull front axle to change brake pads on your 1989 Ford F-250 4wd?
No. just remove the calipers
How do you realign rear wheel on 1988 Ford Festiva?
You don't. If the axle beam is bent you replace it, if the frame is bent you sell it CHEAP and FAST.
How do you change a rear axle seal on a 2004 ford escape?
how t change rar axle seal on 04 ford escape xlt
What does 3 9 mean in the axle code for 1989 Ford F-250?
I believe axle code " 39 " in a 1989 Ford F-250 is a : ( conventional / non limited slip with 3.55 gears )
What is the wheel base of a 1989 Ford Bronco 2?
Measure from center of front axle to center of rear axle.
Will suspension parts from a Ford Aspire fit on a Ford Festiva?
yes and no... all aspire suspension parts front and rear will bolt directly to the festiva body... however the parts are not the same so you have to change the entire structure over to aspire suspension.. the 2 cars share a few individual parts like axle beam and various nuts and bolt. the aspire and festiva also have different wheel lug patterns so you need to have aspire wheels also and spare.... so if you change only the front or only the rear you will need to carry 2 spares.
What is the torque spec for the axle nut on a 1979 Ford Festiva?
The torque specification for the axle nut on a 1979 Ford Festiva is typically around 150-175 ft-lbs (pound-feet). It's important to use a torque wrench to ensure that the nut is tightened to the correct specification, as overtightening can damage the components. Always refer to the specific service manual for the vehicle for the most accurate information.
What are the step by step instructions for taking off the front rotors on a 1990 Ford Festiva?
Th easiest way to change the rotors on a 1990 Ford Festiva is to pay someone. However, remove the tire, remove caliper, remove the hub nut and washer. Remove the rotor from the CV axle. There four bolts on the back side of the rotor, but you may have to press out the rotor bearing. To re-install read backwards
How do you change the axle in a 1985 ford probe?
THERE WAS NO FORD PROBE IN MODEL YEAR 1985
