0
Big job. To replace a flywheel, you need to remove the drive shaft,and the gearbox. iIf a manual transmission,you will also need to remove the clutch and pressure plate.If an automatic, you will need to remove the torque converter. With all this removed, you then remove the flywheel and replace with new one. then reinstall clutch,etc gear box and driveshaft.It is a good idea at this time ,if a manual transmission,to replace the clutch,while you have it apart. "NOTE" make sure when you replace flywheel that the correct number of teeth on flywheel will match number of teeth on starter motor.To do this mark a tooth on the flywheel and count the teeth.Alos count the teeth on the starter motor.installing wrong one will chew up the teeth on new flywheel and starter and then you will have to start all over.
What else can I help you with?
Are the Chevy 400 flywheel and 350 flywheel the same?
No. The 400 is externally balanced, the 350 is internally balanced.
Is the crank and flywheel balanced on a 350 Chevy?
Just the crank. The flywheel is neutral.
How do you change a Chevy 350 flywheel?
remove the enigine and then take out flywheel bolts
Can you use a flywheel from a Chevy 4.3L V6 on a 350 Chevy engine?
No
Is an olds 307 and a Chevy 350 flywheel the same?
NO
Will your flywheel from your Chevy 6 cly work with the 350 you are putting in?
NO.
Does it matter which way the 350 chevy flywheel goes on?
yes
Is a 71 Pontiac 350 flywhhel the same as a 77 Chevy pickup 350 flywheel?
No it's not.
What are flywheel clutch torque settings for Chevy 350?
65ft lbs
What does your flywheel part number 3973458 fit?
a small block 350 chevy
What are flywheel torque settings for 1989 Chevy 350?
75 Ft LBS.
How do you fix a flywheel on a 350 Chevy?
About the only thing that can go wrong with a flywheel is for it to crack or loose teeth. In either case, you replace it, not repair.
