0
With the hood open remove the (2) two headlamp assembly bolts from the upper fascia support. Slide the headlamp assembly outward enough to release the headlamp bracket tabs from the slots in the upper fascia support. Position the headlamp assembly away from the vehicle body to access the electrical connector. Disconnect the electrical connector from the headlamp assembly. Remove the headlamp assembly from the vehicle. If you wish to change the halogen bulb: Disconnect the electrical connector from the headlamp bulb/socket. Remove the headlamp bulb/socket retainer ring from the headlamp, by turning counterclockwise. Remove the headlamp bulb/socket from the headlamp assembly. Hope this helps. G These instructions are similar from around '96 to '03 grand prix model years all trim levels.
Add your answer:
Earn +20 pts
How do you replace the headlight bulb located on a 2002 Pontiac Montana?
replace headlight Pontiac MontanaAssuming it is the same as my 1999, there are two "wing nuts" securing the entire plastic headlight assembly. One is mounted at the top-inboard(towards engine), And the other is outboard of the assembly. Once these two wingnuts are removed, carefully remove the whole assembly. The headlight bulb is contained in the socket... one quarter turn counter-clockwise will remove the socket from the housing.
How do you replace the headlight assembly located on a 1994 Ford Ranger?
detach the bulbs and remove the clips behind the headlight assembly
Where is the horn on a 2002 Dodge neon located?
it is behind the passenger side headlight assembly. you will have to remove the headlight assembly to replace it.
How do you remove headlight assembly?
How to remove headlight assembly on 2003 Lexus GX470
Headlight assembly removal 2002 Honda accord?
Remove the wiring harness from the back of the headlight. Remove the headlight assembly bolts. The headlight assembly will come out.
How do you remove the headlight assembly on a 2001 Camaro?
How do you remove the headlight assembly on a 2001 camaro?"
How do you replace the headlight bulb located on a 2000 Chevy Venture?
Hi, You have to remove the entire headlight assembly to get to the bulb, which is located in the back of the assembly. There are three wing nuts that hold the assembly in, and those will have to be removed. Then remove the side signal assembly first, then the headlight assembly. I have provided a link that shows exactly how this is done and where these wing nuts are. Good Luck
How do you remove the headlight assembly located on a 1998 Cadillac cts?
There is no 1998 CTS
How do you replace the headlight bulb located on a 2003 Chevy S 10?
Open the hood, remove the two locks that hold the headlight assembly in place, with the two locks removed you can wiggle the headlight assembly out and gain access to the back side of the assembly to remove and replace the headlight bulb.
How do you remove the headlight assembly in order to replace a headlight bulb on a Pontiac Grand Am SE?
It depends completely on what year it is. If it is a composite style headlight (newer years), then the bulb should remove from the back of the assembly, while the assembly is left in the car. If it is an older year model, then the assembly is held in with two screws that can be reached from the front of the head light.
How do you replace a headlight on a 1997 Bonneville?
Begin by removing the wiring harness from the back of your 1997 Pontiac Bonneville headlight. Remove the headlight assembly retaining bolts. Reverse the process to install your new headlight.
How to remove the headlight assembly in a 1998 Mitsubishi eclipse?
Begin by removing the wiring harness from the back of your headlight. Remove the headlight assembly retaining bolts. The headlight assembly will come out.
