Well it will cost an avg about 600-800 dollars to get it repaired depending on the the type of car and size of engine and some the will look at it and add on some money for how hard it will be to get access to it.
A blown gasket can be repaired by replacing the gasket...if you are talking about the head gasket, then you have to remove the cylinder head from the engine block and replace the gasket that is inbetween them. Cracked heads generally have to be replaced because they are made of aluminum which cannot be repaired permanently once it is cracked.
It requires replacing the head gasket.
If not repaired at once you will get water in the oilpan. It can warp the engine head.
Usually when the cylinder head gasket is blown (broken or damaged). It cannot be repaired but has to be replaced with a new head gasket.
Contact a ASE certified mechanic in your area.
Yes get it from the dealership
hi if you replace the head gasket you will need to have the head repaired and machined as the head alloy eat's out which causes the gasket to fail
Other than a leak, a blown head gasket. Very serious, so stop driving until this is repaired if you suspect a blown head gasket. Serious engine damage will occur.Other than a leak, a blown head gasket. Very serious, so stop driving until this is repaired if you suspect a blown head gasket. Serious engine damage will occur.
Take it back to the garage that did the head gasket repair. They probably misplaced a vacuum line.
Not very. You should stop and get it repaired ASAP.
Yes, a blown head gasket will allow coolant to enter the combustion chamber and the oil pan mixing with the oil. This will, if not repaired, slowly destroy the engine bearings and rings. STOP driving this car until you have this repaired.
You've got either a leaking intake gasket or a leaking head gasket. It's a serious problem which needs to be repaired.