0
How to remove ford expedition rear panel next to the third seats row to review the sub woofer?
I have a 1998 Expedition. First the panel right over the speaker will pop off. But this does little more than allow you to see the speaker, screws that mount around it and the plug to the rear amp. There is a bolt behind the speaker that needs to be removed also. I just did this today, so the best I recall. There are two plastic caps that are used to hold the cargo net in place. these are on the post behind the seat belt. These unscrew. With those out, you can remove the hole plastic panel from the side. This reveals the "box" that contain the speaker. There is one screw in the upper right that holds this in place. Take that out. Then pull the box out at an angel to get your socket wrench onto the bolt behind the speaker. Once you get that out, then take out the maybe 8 screws that hold the front of the speaker. Then you can pull is out, unplug it etc. and if you can find a replacement, then you can put a speaker back in. Right now, I have not found a replacement other than the dealer, which is way too much. Hope this helps.
What else can I help you with?
How do you remove the sub woofer 1997 ford expedition?
I removed the sub woofer on my 98 EB Expedition. this is how i did it. you will need to remove the side panel from the right side passageners door, remove the seat belt hold down bolt, remove the side pannel connection points at the floor and the back gate. The subwoofer is connected to a box that needs to be removed first. this is not dificult to do, just a few screws. then remove the entire box and you will find the sub woofer is attached from behind the box. hope this helps.
How do you replace the subwoofer on a 2004 Honda Pilot?
how to remove the right rear panel for sub woofer remove
Instrument panel removal Ford Expedition?
How do you remove the instrument panel in a 1998 Ford Expedition 5.4 Engine
How do you remove passenger side kick panel on a 2000 expedition?
Using a screwdriver, remove the screws and clips from the panel. Pull the panel away slowly, remove wiring connections and the panel will come free.Ê
How do you get the door panel off a Ford F-150?
There is an already answered question that says "how to remove the Ford Expedition door panel", Search by Ford Expedition and you will find the answer you need.
How do you replace rear speakers in a jaguar xk-8?
How do you remove the interior panel containing the rear woofer in a 2002 jaguar xk8 coupe? thanks
How do you remove the RR door panel of a 1999 Expedition?
Remove the door panel by carefully lifting the panel upward to release the retaining clips. Remove the electrical plugs that control the windows, exc. The installation is the reverse of the removal.
Where can you find a factory amplifier on a 1998 expedition Eddie Bauer?
as far as i know there is only one amp and it powers the sub woofer. it is located in back, in the panel beside the sub woofer. pull off the panel covering the sub and look up to the left of the sub and there is a little gray metal box and a wire going from it into the sub box. the little metal box is the amp.
Where is the tire jack for a 1999 Ford Expedition?
it is on the rear rigth side there is a panel remove the panel and bingo......you'll see a jack if, it came with it.
How do you remove the Ford Expedition door panel?
Door Panels Removal & Installation 1. Remove the sail panel. 2. Remove the door panel by carefully lifting the panel upward to release the retaining clips. 3. Remove the electrical plugs that control the windows, exc. 4. The installation is the reverse of the removal.
How to remove the driver door panel on an 02 Expedition?
Door Panels Removal & Installation 1. Remove the sail panel. 2. Remove the door panel by carefully lifting the panel upward to release the retaining clips. 3. Remove the electrical plugs that control the windows, exc. 4. The installation is the reverse of the removal.
How do you remove the front door panel on a Ford Expedition?
Door Panels Removal & Installation 1. Remove the sail panel. 2. Remove the door panel by carefully lifting the panel upward to release the retaining clips. 3. Remove the electrical plugs that control the windows, exc. 4. The installation is the reverse of the removal.
